Aviation Mechanic - General, Airframe, and Powerplant › I. General › Task A. Fundamentals of Electricity and Electronics

AM.I.A.K7d

Knowledge

Electrical laws and theory.

Faraday's Law

Practice questions Ask the tutor

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - General p. 12-56
Chapter 12: Fundamentals of Electricity & Electronics › Inductance › Characteristics of Inductance
wire, a voltage is induced and can be measured on a voltmeter. This is commonly known as Faraday’s Law or the Law of Electromagnetic Induction, which states that the induced emf or electromagnetic force in a closed loop…
Aviation Maintenance Technician Handbook - General p. 5-25
Chapter 5: Physics for Aviation › Gas Laws › General Gas Law
General Gas Law By combining Boyle’s and Charles’ laws, a single expression can be derived which states all the information contained in both. The formula which is used to express the general gas law is as follows: = Temperature ... Temperature Pressure 2 (Volume 2) Pressure 1 (Volume 1) When using the general gas law formula, temperature and pressure must be in the absolute. Example: 20 ft3 of the gas argon is compressed to 15 ft3. The gas starts…
Aviation Maintenance Technician Handbook - Airframe p. 9-1
Chapter 9: Aircraft Electrical System › Introduction › Ohm’s Law
Law Ohm’s Law describes the basic mathematical relationships of electricity. The law was named after German Physicist George Simon Ohm (1789–1854). Basically, Ohm’s Law states that the current (electron flow) through a conductor is directly proportional ... conductor to which a voltage of 1 volt is applied. The primary formula derived from Ohm’s Law is: E = I × R (E = electromotive force measured in volts, I = current flow measured in amps, and R = resistance measured in ohms…