AM.I.E.S2
SkillDetermine and properly torque aircraft hardware.
From the FAA library
- Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Airplane Assembly › Aileron Installation
inspected to ensure the cables/push-pull rods are routed properly. When a balance cable is installed, check for correct attachment and operation to determine the ailerons are moving in the proper direction and opposite each other. Flap Installation The design, installation ... specific aircraft, the manufacturer’s maintenance manual and the illustrated parts book must be followed to ensure the correct procedures and parts are used. Simple flap systems are usually operated manually by cables and/or torque tubes. Typically, many…
- Chapter 7: Propellers › Propeller Removal & Installation › Installation
given position, or 180° from that position. Check the engine and airframe manuals to determine if either manual specifies a propeller mounting position. Caution: Mounting hardware must be clean and dry to prevent excessive preload of the mounting flange. Caution ... Install the propeller mounting nuts (dry) with spacers. Torque the propeller mounting nuts (dry) in accordance with the proper specifications and safety wire the studs in pairs (if required by the aircraft maintenance manual) at the rear of the propeller…
- Chapter 7: Aircraft Materials, Hardware, & Processes › Aircraft Metals › Aircraft Hardware
Aircraft Hardware Aircraft hardware is the term used to describe the various types of fasteners and miscellaneous small items used in the manufacture and repair of aircraft. The importance of aircraft hardware is often overlooked because of its small size ... however, the safe and efficient operation of any aircraft is greatly dependent upon the correct selection and use of aircraft hardware. An aircraft, even though made of the best materials and strongest parts, would be of doubtful value unless those…