AM.I.F.S9
SkillFollow a checklist to start up or shut down an aircraft reciprocating or turbine engine.
From the FAA library
- Chapter 1: Aircraft Structures › Powerplant & Transmission › Turbine Engines
retractable. Powerplant & Transmission The two most common types of engine used in helicopters are the reciprocating engine and the turbine engine. Reciprocating engines, also called piston engines, are generally used in smaller helicopters. Most training helicopters use reciprocating engines because ... they are relatively simple and inexpensive to operate. Turbine Engines Turbine engines are more powerful and are used in a wide variety of helicopters. They produce a tremendous amount of power for their size but are generally more expensive…
- Chapter 10: Engine Maintenance & Operation › Turbine Engine Operation
inlet temperature is also an indication of proper operation of the engine oil cooler. Figure 10-73. Typical turbine engine instruments. Turbine Engine Operation The engine operating procedures presented here apply generally to turbofan, turboprop, turboshaft, and auxiliary power units ... have general application. The manufacturer’s operating instructions should be consulted before attempting to start and operate any turbine engine. A turbofan engine has only one power control lever. Adjusting the power lever, or throttle lever, sets up a thrust…
- Chapter 10: Engine Maintenance & Operation › Turbine Engine Calibration & Testing › Turbine Engine Analyzer Uses
Turbine Engine Calibration & Testing Turbine Engine Analyzer Uses when the engine is running. However, the turbine wheels are relatively massive, compared with the case, and are not cooled so readily. The turbine case is exposed to cooling air from both ... their residual heat at different rates after the engine has been shut down. The case, cooling faster, tends to shrink upon the wheels, that are still rotating. Under extreme conditions, the turbine blades may squeal or seize; thus, a cooling…