AM.I.G.K14
KnowledgeMaterials used for protection of airframe structures.
From the FAA library
- Chapter 8: Aircraft Painting & Finishing › Introduction
more than aesthetics; it affects the weight of the aircraft and protects the integrity of the airframe. The topcoat finish is applied to protect the exposed surfaces from corrosion and deterioration. Also, a properly painted aircraft is easier to clean ... adhere as readily to the surface. A wide variety of materials and finishes are used to protect and provide the desired appearance of the aircraft. The term “paint” is used in a general sense and includes primers, enamels, lacquers…
- Chapter 3: Aircraft Fabric Covering › General Fabric Covering Process › Preparation for Fabric Covering Work
away the old fabric from the airframe with razor blades or utility knife. Care should be taken to ensure that no damage is done to the airframe. [Figure 3-16] To use the old covering for templates in transferring ... covering, the old covering should be removed in large sections. NOTE: any rib stitching fasteners, if used to attach the fabric to the structure, should be removed before the fabric is pulled free of the airframe. If fasteners are left…
- Chapter 8: Cleaning & Corrosion Control › Mechanical Cleaning Materials › Mild Abrasive Materials
Nonionic Detergent Cleaners These materials may be either water-soluble or oil-soluble. The oil-soluble detergent cleaner is effective in a 3 to 5 percent solution in dry cleaning solvent for softening and removing heavy preservative coatings. This mixture ... performance is similar to the emulsion cleaners mentioned previously. Mechanical Cleaning Materials Mechanical cleaning materials must be used with care and in accordance with directions given, if damage to finishes and surfaces is to be avoided. Mild Abrasive Materials…