Aviation Mechanic - General, Airframe, and Powerplant › I. General › Task G. Cleaning and Corrosion Control

AM.I.G.K20

Knowledge

Regulatory requirements for replacing identification, registration markings, and placards.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.310 Minimum performance requirements for standard remote identification unmanned aircraft.
Minimum performance requirements for standard remote identification unmanned aircraft. A standard remote identification unmanned aircraft must meet the following minimum performance requirements: (a) Control station location. The location of the control station of the unmanned aircraft must be generated ... must correspond to the location of the person manipulating the flight controls of the unmanned aircraft system. (b) Time mark. The time mark message element must be synchronized with all other remote identification message elements. (c) Self-testing and monitoring…
Aeronautical Information Manual p. 2-3-1
Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-3. Runway Markings
Aviation Safety Reporting Program. Pilots may also report these situations to the FAA regional airports division. d. The markings and signs described in this section of the AIM reflect the current FAA recommended standards. 2-3-2. Airport Pavement Markings ... General. For the purpose of this section, the airport pavement markings have been grouped into four areas: 1. Runway Markings. 2. Taxiway Markings. 3. Holding Position Markings. 4. Other Markings. b. Marking Colors. Markings for runways are white. Markings defining…
Aviation Maintenance Technician Handbook - General PDF page 618
Chapter 13: Mechanic Privileges & Limitations › Mechanic Certification: Subpart D—Mechanics (by 14 CFR Section) › Section 65.79, Skill Requirements
Section 65.77, Experience Requirements Each mechanic applicant must have a certificate of completion from a certificated aviation maintenance technician school (AMTS) (14 CFR part 147) or provide documented evidence of a minimum of 18 months practical experience related to either ... airframe or powerplant maintenance (30 months required if applying for certification for both airframe and powerplant). Section 65.79, Skill Requirements Oral and practical tests to determine the applicant’s basic knowledge and skills necessary for the certificate or rating sought…