AM.I.G.R6
Risk managementDisposal of chemicals and waste materials.
From the FAA library
- Chapter 8: Cleaning & Corrosion Control › Mechanical Cleaning Materials › Mild Abrasive Materials
Nonionic Detergent Cleaners These materials may be either water-soluble or oil-soluble. The oil-soluble detergent cleaner is effective in a 3 to 5 percent solution in dry cleaning solvent for softening and removing heavy preservative coatings. This mixture ... performance is similar to the emulsion cleaners mentioned previously. Mechanical Cleaning Materials Mechanical cleaning materials must be used with care and in accordance with directions given, if damage to finishes and surfaces is to be avoided. Mild Abrasive Materials…
- Chapter 8: Cleaning & Corrosion Control › Mechanical Cleaning Materials › Abrasive Papers
Impregnated cotton wadding material is used for removal of exhaust gas stains and polishing corroded aluminum surfaces. It may also be used on other metal surfaces to produce a high reflectance. Aluminum metal polish is used to produce a high ... grades of aluminum wool, coarse, medium, and fine are used for general cleaning of aluminum surfaces. Impregnated nylon webbing material is preferred over aluminum wool for the removal of corrosion products and stubborn paint films and for the scuffing…
- Chapter 8: Cleaning & Corrosion Control › Direct Chemical Attack
Types of Corrosion There are two general classifications of corrosion that cover most of the specific forms: direct chemical attack and electrochemical attack. In both types of corrosion, the metal is converted into a metallic compound, such as an oxide ... what is called anodic change, and the corrosive agent is reduced and is considered as undergoing cathodic change. Direct Chemical Attack Direct chemical attack, or pure chemical corrosion, is an attack resulting from direct exposure of a bare surface…