AM.I.I.K12
KnowledgeFAA databases and resources available, including TCDSs and supplemental type certificates.
From the FAA library
- Appendix A: References
FAA, 2018: Currency and Additional Qualification Requirements for Certificated Pilots. AC 61-98. Washington: U.S. Department of Transportation, Federal Aviation Administration. FAA, 1989: Announcement of Availability: Industry-Developed Transition Training Guidelines for High Performance Aircraft. AC 61-103. Washington ... Department of Transportation, Federal Aviation Administration. FAA, 2003: Operations of Aircraft at Altitudes Above 25,000 Feet MSL and/or MACH Numbers (Mmo) Greater than .75. AC 61-107. Washington: U.S. Department of Transportation, Federal Aviation Administration. FAA, 2007: Aviation Maintenance…
- Appendix F—ATC Transponder Tests and Inspections › Forms › Airworthiness Certificates
Forms Airworthiness Certificates In addition to the registration certificate that indicates the ownership of an aircraft, an airworthiness certificate indicates the airworthiness of the aircraft. AC 21-12, Application for U.S. Airworthiness Certificate, FAA Form 8130-6, is a comprehensive ... guide for the completion of the application form for this certificate. There are two certificates: standard • AA is the two-letter designator for Project Type – see table 1 below • nnnnn is the integer sequential number for the specified…
- Chapter 13: Mechanic Privileges & Limitations › Mechanic Certification: Subpart D—Mechanics (by 14 CFR Section) › Section 65.87, Powerplant Rating: Additional Privileges
hour inspection (if required by 14 CFR part 91) on a powerplant or propeller is also authorized. A certificated mechanic with a powerplant rating can approve and return to service the powerplant or propeller of an aircraft with a special ... airworthiness certificate, in the light-sport category (refer to 14 CFR part 21, section 21.190) after performing and inspecting a major repair or major alteration. The work must have been done on products that are not produced under FAA approval…