Aviation Mechanic - General, Airframe, and Powerplant › I. General › Task I. Regulations, Maintenance Forms, Records, and Publications

AM.I.I.K14

Knowledge

Compliance requirements for manufacturer-specified maintenance and inspection intervals.

Practice questions Ask the tutor

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - General p. 2-44
Appendix F—ATC Transponder Tests and Inspections › Records › Electronic Records
provide the content and structure of maintenance manuals for aircraft and their components that are operated as LSAs. Some additional definitions from section 3, Terminology, that help to better explain the LSA concepts are: • Annual condition inspection—defined ... detailed inspection accomplished once a year in accordance with instructions provided in the maintenance manual supplied with the LSA. The purpose of this inspection is to look for any wear, corrosion, or damage that would cause…
14 CFR Part 43 — Maintenance, Preventive Maintenance, Rebuilding, and Alteration Open
14 CFR § 43.17 Maintenance, preventive maintenance, and alterations performed on U.S. aeronautical products by certain Canadian persons.
Maintenance, preventive maintenance, and alterations performed on U.S. aeronautical products by certain Canadian persons. in accordance with the requirements of paragraph (d) of this section and approve the affected products for return to service in accordance with the requirements ... paragraph (e) of this section. (d) Performance requirements. A person authorized in paragraph (c) of this section may perform maintenance (including any inspection required by Sec. 91.409 of this chapter, except an annual inspection), preventive maintenance, and alterations, provided…
Aviation Maintenance Technician Handbook - General p. 2-15
Chapter 2: Regulations, Maintenance Forms, Records, & Publications › Section 43.3—Persons authorized to perform maintenance, preventive maintenance, rebuild…
pilot has been satisfactorily trained and is authorized in writing by the certificate holder to perform the required maintenance. • There is no certificated mechanic available. • The certificate holder has procedures to evaluate the work performed when a decision for airworthiness ... required. The work done is listed in paragraph (c) of Appendix A of this chapter. 8. Holder of part 135 certificate may allow pilots of aircraft with nine or less passenger seats to remove and reinstall cabin seats and stretchers…