AM.I.I.K17

From the FAA library

• Aviation Maintenance Technician Handbook - Airframep. 2-58
  Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Aircraft Inspection › Performing an Airframe Conformity & Airworthiness Inspection

  limits, control surface movements, engine make and models, minimum crew, fuel type, etc.; the horsepower and rpm limits, thrust limitations, size and weight for engines; and blade diameter, pitch, etc., for propellers. Additionally, it provides all the various components ... service bulletin is incorporated as part of an airworthiness directive. 2. The service bulletins are part of the FAA-approved airworthiness limitations section of the manufacturer’s manual or part of the type certificate. 3. The service bulletins are incorporated…

• Aviation Maintenance Technician Handbook - Airframep. 2-60
  Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Required Inspections › Periodic Maintenance Inspections

  system. The Airworthiness Limitations section must contain a legible statement in a prominent location that reads: “The Airworthiness Limitations section is FAA-approved and specifies maintenance required under 14 CFR part 43, sections 43.16 and part 91, section 91.403, unless…

• Pilot's Handbook of Aeronautical Knowledgep. 1-23
  Chapter 1: Introduction To Flying › Knowledge and Skill Tests › When To Take the Practical Test

  sport pilot applicants) • The pilot log book records • A graduation certificate from an FAA-approved school (if applicable) The applicant must provide an airworthy aircraft with equipment relevant to the areas of operation required for the practical test ... will also be asked to produce and explain the: • Aircraft’s registration certificate • Aircraft’s airworthiness certificate • Aircraft’s operating limitations or FAA-approved aircraft flight manual (if required) • Aircraft equipment list • Required weight and balance data • Maintenance records • Applicable…