AM.I.I.S9
SkillCheck a Technical Standard Order (TSO) or part manufacturing authorization for the proper markings.
From the FAA library
- Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Required Inspections › Air Traffic Control (ATC) Transponder Inspections
when the ELT must be installed. It also states that an ELT that meets the requirements of Technical Standard Order (TSO)-C91 may not be used for new installations. The pilot-in-command of an aircraft equipped with ... subject to 14 CFR part 43 and part 91, section 91.413 and should be included in the required inspections. It is essential that the impact switch operation and the transmitter output be checked using the manufacturer’s instructions. Testing…
- Chapter 13: Aircraft Landing Gear Systems › Tire Mounting › Tubeless Tires
made. Most important is to check that the tire is specified for the aircraft application. It should say tubeless on the sidewall. The part number, size, ply rating, speed rating, and technical standard order (TSO) number should also…
- 14 CFR § 43.7 Persons authorized to approve aircraft, airframes, aircraft engines, propellers, appliances, or component parts for return to service after maintenance, preventive maintenance, rebuildi
Persons authorized to approve aircraft, airframes, aircraft engines, propellers, appliances, or component parts for return to service after maintenance, preventive maintenance, rebuilding, or alteration. (a) Except as provided in this section and § 43.17, no person, other than the Administrator ... approve an aircraft, airframe, aircraft engine, propeller, appliance, or component part for return to service after it has undergone maintenance, preventive maintenance, rebuilding, or alteration. (b) The holder of a mechanic certificate or an inspection authorization may approve an aircraft…