Aviation Mechanic - General, Airframe, and Powerplant › I. General › Task K. Inspection Concepts and Techniques

AM.I.K.R4

Risk management

Selection of inspection techniques.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Airplane Flying Handbook p. 17-5
Chapter 17: Transition to Light Sport Airplanes (LSA) › Airframe and Systems › Construction
constructed using wood, tube and fabric, metal, composite, or any combination of materials. In general, the manufacturer selects materials and design to keep the airplane lightweight while maintaining the structural requirements. Composite LSAs tend to be sleek and modern looking ... types of construction and the typical concerns for each type of construction: ⦁ Steel tube and fabric—while the techniques of steel tube and fabric construction hails back to the early days of aviation, this construction method has proven…
Aviation Instructor's Handbook p. 1-1
Chapter 1: Risk Management and Single-Pilot Resource Management › Introduction
happened remains a matter of speculation, professional mechanics heed warning signs of potential problems. The combination of a lengthy inspection, numerous technicians, an overworked supervisor, a poor checklist, and vague communication raise a red flag of caution. This scenario underscores ... hazard identification, assessment, and mitigation, is essential in keeping risk at acceptable levels. Part of this process is selecting the appropriate controls to mitigate the risk of the identified hazard. The primary objective of risk management is accident prevention, which…
Aviation Maintenance Technician Handbook - Powerplant p. 4-35
Chapter 4: Engine Ignition & Electrical Systems › Spark Plug Inspection & Maintenance › Spark Plug Removal
If a plug is dropped on the floor or other hard surface…