AM.II.B.K2
KnowledgeEffects of moisture/humidity on wood and fabric coverings.
From the FAA library
- Chapter 3: Aircraft Fabric Covering › General Fabric Covering Process › Preparation of the Airframe Before Covering
Figure 3-14. Rotating stands and sawhorses facilitate easy access to top and bottom surfaces during the fabric covering process. Figure 3-15. Some components of a work area for covering an aircraft with fabric. To obtain a smooth finish ... fabric-covered leading edges of aluminum wings, a sheet of felt or polyester padding may be applied before the fabric is installed. This should only be done with the material specified in the STC under which the technician is working…
- Chapter 3: Aircraft Fabric Covering › General Fabric Covering Process › Preparation for Fabric Covering Work
custom-fit presewn fabric envelope is slid into position over a fuselage for the envelope method of fabric covering. Other than fitting, most steps in the covering process are the same as with the blanket covering method. Many ... substances used in most re-covering processes are highly toxic. Proper protection must be used to avoid serious short- and long-term adverse health effects. Eye protection, a proper respirator, and skin protection are vital. As mentioned in the beginning…
- Chapter 3: Aircraft Fabric Covering › General History
Chapter 3: Aircraft Fabric Covering General History Fabric-covered aircraft play an important role in the history of aviation. The famous Wright Flyer utilized a fabric-covered wood frame in its design, and fabric covering continued to be used ... many aircraft designers and builders during the early decades of production aircraft. The use of fabric covering on an aircraft offers one primary advantage: light weight. In contrast, fabric coverings have two disadvantages: flammability and lack of durability. Finely woven…