AM.II.B.R6
Risk managementUse of materials that are not part of an approved repair system.
From the FAA library
- 14 CFR § 1.1 General definitions.
communication system (LRCS). A system that uses satellite relay, data link, high frequency, or another approved communication system which extends beyond line of sight. Long-range navigation system (LRNS). An electronic navigation unit that is approved for use under instrument ... inertial navigation system or global positioning system. Mach number means the ratio of true airspeed to the speed of sound. Main rotor means the rotor that supplies the principal lift to a rotorcraft. Maintenance means inspection, overhaul, repair, preservation…
- Chapter 6: Aircraft Wood & Structural Repair › Plywood Skin Repairs › Fabric Patch
plywood. This repair is used on holes not exceeding 1-inch in diameter after being trimmed to a smooth outline. The edges of the trimmed hole should first be sealed, preferably with a two-part epoxy varnish. This varnish requires ... provides the best seal on bare wood. The fabric used for the patch should be of an approved material using the cement recommended by the manufacturer of the fabric system. The fabric patch should be cut with pinking shears…
- Chapter 4: Aircraft Metal Structural Repair › Repairability of Sheet Metal Structure › Structural Support During Repair
Repairability of Sheet Metal Structure The following criteria can be used to help an aircraft technician decide upon the repairability of a sheet metal structure: • Type of damage. Figure 4-170. Repair of cracks by stop-drilling. Type of original ... material. Location of the damage. • Type of repair required. • Tools and equipment available to make the repair. The following methods, procedures, and materials are only typical and should not be used as the authority for a repair. Structural Support During…