AM.II.C.K3

From the FAA library

• Aviation Maintenance Technician Handbook - Airframep. 2-44
  Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Control Operating Systems › Cable System Installation

  turnbuckles are manufactured and designed to accommodate special locking devices. A typical unit is shown in Figure 2-77. Cable Connectors In addition to turnbuckles, cable connectors are used in some systems. These connectors enable a cable length ... quickly connected or disconnected from a system. Figure 2-78 illustrates one type of cable connector in use. Spring-Back With a control cable properly rigged, the flight control should hit its stops at both extremes prior to the flight…

• Aviation Maintenance Technician Handbook - Airframep. 9-95
  Chapter 9: Aircraft Electrical System › Electrical System Components › Switches

  switch can be prevented by mounting a suitable guard over the switch. [Figure 9-165] Figure 9-164. Coaxial cable connectors. A specifically designed switch should be used in all circuits where a switch malfunction would be hazardous. Such switches…

• Small Unmanned Aircraft System (Small UAS)p. 8-34
  CHAPTER 8. SMALL UNMANNED AIRCRAFT OVER PEOPLE › 8.12 Remote Pilot Operating Instructions › Flight Mode G: Any operation not conducted over people

  model] Airframe 2) Transmitter and Ground Station 3) USB to Micro USB Cable 4) USB Interface/Programmer 5) 3400mAh 9.1V LiPo Battery 6) 9.1V LiPo Balance Connector Charge Lead 7) AC to DC Adapter/Power Supply 8) 16GB microSD Card ... model] Airframe 2) Transmitter and Ground Station 3) USB to Micro USB Cable 4) USB Interface/Programmer 5) 5600mAh 11.1V LiPo Battery 6) 11.1V LiPo Balance Connector Charge Lead 7) AC to DC Adapter/Power Supply 8) 16GB microSD Card…