Aviation Mechanic - General, Airframe, and Powerplant › II. Airframe › Task C. Flight Controls

AM.II.C.S13

Skill

Locate aircraft flight control travel limits.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - Airframe p. 2-52
Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Rigging Checks › Control Surface Travel
During the checking of control surface travel, ensure that chains, cables, etc…
FAA Aeronautical Chart Users' Guide p. 18
EXPLANATION OF VFR TERMS AND SYMBOLS › AIRSPACE
Temporary Flight Restriction (TFR) is a type of Notice to Airmen (NOTAM). A TFR defines an area where air travel is restricted due to a hazardous condition, a special event, or a general warning for the entire airspace. The text ... which the ready identification, location, and control of all aircraft is required in the interest of national security. ADIZ boundaries include Alaska, Hawaii, Guam and the Contiguous U.S. National Defense Airspace Temporary Flight Restriction (TFR) Areas are bounded with cross…
Pilot's Handbook of Aeronautical Knowledge p. 6-2
Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness…