AM.II.D.K5

From the FAA library

• Aviation Maintenance Technician Handbook - Generalp. 10-14
  Chapter 10: Inspection Concepts & Techniques › Special Inspections › Hard or Overweight Landing Inspection

  mechanic with the areas to be inspected. As such, they are not all inclusive. When performing any of these special inspections, always follow the detailed procedures in the aircraft maintenance manual. In situations where the manual does not adequately address ... advice from other maintenance technicians who are highly experienced with them. The following paragraphs describe some typical types of special inspections. Hard or Overweight Landing Inspection The structural stress induced by a landing depends not only upon the gross weight…

• Aviation Maintenance Technician Handbook - Generalp. 10-12
  Chapter 10: Inspection Concepts & Techniques › Special Inspections

  aircraft have all these systems installed. Small and simple aircraft have fewer systems than larger, more complex aircraft. Special Inspections During the service life of an aircraft, occasions may arise when something out of the ordinary care ... aircraft could possibly affect its airworthiness. When these situations are encountered, special inspection procedures, also called conditional inspections, are followed to determine if damage to the aircraft structure has occurred. The procedures Appendix D to Part 43—Scope and Detail…

• Aviation Maintenance Technician Handbook - GeneralPDF page 619
  Chapter 13: Mechanic Privileges & Limitations › Mechanic Certification: Subpart D—Mechanics (by 14 CFR Section) › Section 65.87, Powerplant Rating: Additional Privileges

  hour inspection (if required per 14 CFR part 91 section 91.409) on the airframe. A certificated mechanic with an airframe rating can approve and return to service the airframe of an aircraft with a special airworthiness certificate ... Similarly, a mechanic holding a powerplant rating has the same limitations imposed regarding the powerplant and propeller as the airframe technician has on the airframe rating. They may perform and return to service minor repairs or alterations. They may also…

• Aviation Maintenance Technician Handbook - Powerplantp. G-2
  Glossary

  authorized special inspection programs. An annual inspection must be conducted every 12 calendar months, and it must be conducted by an aviation maintenance technician who holds an Airframe and Powerplant rating and an Inspection Authorization. The scope…

• 14 CFR Part 65 — Certification: Airmen Other Than Flight CrewmembersOpen
  14 CFR § 65.85 Airframe rating; additional privileges.

  inspection required by part 91 of this chapter on an airframe, or any related part or appliance, and approve for return to service. (b) A certificated mechanic with an airframe rating can approve for return to service an airframe ... related part or appliance, of an aircraft with a special airworthiness certificate in the light-sport category after performing and inspecting a major repair or major alteration for products that are not produced under an FAA approval provided…