AM.II.D.R3
Risk managementPerforming radiographic inspections.
From the FAA library
- Chapter 10: Engine Maintenance & Operation › Structural Inspection › X-ray
becomes a radiograph, or shadow picture, of the object. This inspection medium, as a portable unit, provides a fast and reliable means for checking the integrity of engine components. Additional and more thorough information on NDT inspection is covered ... detail in the Aviation Maintenance Technician Handbook - General (FAA-H-8083-30, as amended). Dimensional Inspection The dimensional inspection is used to assure that the engine’s component parts and clearances meet the manufacturer’s specifications. These specs are listed…
- Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Required Inspections › Periodic Maintenance Inspections
Periodic Maintenance Inspections Annual Inspection With few exceptions, no person may operate an aircraft unless, within the preceding 12 calendar months, it has had an annual inspection in accordance with 14 CFR part 43 and was approved for return ... person authorized under section 43.7. (A certificated mechanic with anAirframe and Powerplant (A&P) rating must hold an inspection authorization (IA) to perform an annual inspection.) A checklist must be used and include as a minimum, the scope and detail…
- Chapter 10: Inspection Concepts & Techniques › Special Inspections › Hard or Overweight Landing Inspection
this reason, a special inspection is performed after a landing is made at a weight known to exceed the design landing weight or after a rough landing, even though the latter may have occurred when the aircraft did not exceed ... design landing weight. The frequency and detail of the progressive inspection shall provide for the complete inspection of the aircraft within each 12 calendar months and be consistent with the manufacturer's recommendations, field service experience, and the kind…