AM.II.D.S2
SkillPerform a portion of a 100-hour inspection in accordance with 14 CFR part 43.
From the FAA library
- Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Required Inspections › Periodic Maintenance Inspections
Periodic Maintenance Inspections Annual Inspection With few exceptions, no person may operate an aircraft unless, within the preceding 12 calendar months, it has had an annual inspection in accordance with 14 CFR part 43 and was approved for return ... person authorized under section 43.7. (A certificated mechanic with anAirframe and Powerplant (A&P) rating must hold an inspection authorization (IA) to perform an annual inspection.) A checklist must be used and include as a minimum, the scope and detail…
- 14 CFR § 43.15 Additional performance rules for inspections.
CFR § 43.15 Additional performance rules for inspections. (a) General. Each person performing an inspection required by part 91, 125, or 135 of this chapter, shall— (1) Perform the inspection so as to determine whether the aircraft, or portion(s) thereof ... under inspection, meets all applicable airworthiness requirements; and (2) If the inspection is one provided for in part 125, 135, or § 91.409(e) of this chapter, perform the inspection in accordance with the instructions and procedures set forth…
- Chapter 10: Inspection Concepts & Techniques › Special Inspections › Hard or Overweight Landing Inspection
this reason, a special inspection is performed after a landing is made at a weight known to exceed the design landing weight or after a rough landing, even though the latter may have occurred when the aircraft did not exceed ... design landing weight. The frequency and detail of the progressive inspection shall provide for the complete inspection of the aircraft within each 12 calendar months and be consistent with the manufacturer's recommendations, field service experience, and the kind…