Aviation Mechanic - General, Airframe, and Powerplant › II. Airframe › Task E. Landing Gear Systems

AM.II.E.S13

Skill

Inspect a tire for defects.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - Airframe p. 13-87
Chapter 13: Aircraft Landing Gear Systems › Tire Mounting › Tubeless Tires
that is to have a tire mounted upon it must be thoroughly inspected to ensure it is serviceable. Pay close attention to the bead seat area, which should be smooth and free from defects. The wheel half mating surface should ... should be lubricated and in good condition to ensure it seals the wheel for the entire life of the tire. Follow the manufacturer’s instructions when inspecting wheels and the tips provided earlier in this chapter. [Figure…
Aviation Maintenance Technician Handbook - General p. 10-13
Chapter 10: Inspection Concepts & Techniques › Special Inspections
insecure attachment. (11) Cowling—for cracks, and defects. (e) Each person performing an annual or 100-hour inspection shall inspect (where applicable) the following components of the landing gear group: (1) All units—for poor condition and insecurity of attachment ... condition of bearings. (8) Tires—for wear and cuts. (9) Brakes—for improper adjustment. (10) Floats and skis—for insecure attachment and obvious or apparent defects. (f) Each person performing an annual or 100-hour inspection shall inspect (where applicable…
Aviation Maintenance Technician Handbook - General p. 10-2
Chapter 10: Inspection Concepts & Techniques › Checklists
Internal engine—for cylinder compression and for metal particles or foreign matter…