Aviation Mechanic - General, Airframe, and Powerplant › II. Airframe › Task E. Landing Gear Systems

AM.II.E.S27

Skill

Inspect a brake for serviceability.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - Airframe p. 13-66
Chapter 13: Aircraft Landing Gear Systems › Aircraft Brakes › Brake Inspection & Service
Follow the manufacturer’s instructions at all times when inspecting or attempting to perform maintenance on these units. Brake Inspection & Service Brake inspection and service is important to keep these critical aircraft components fully functional at all times. There ... followed to ensure proper maintenance. On Aircraft Servicing Inspection and servicing of aircraft brakes while installed on the aircraft is required. The entire brake system must be inspected in accordance with manufacturer’s instructions. Some common inspection items include: brake…
Aviation Maintenance Technician Handbook - Airframe p. 13-69
Chapter 13: Aircraft Landing Gear Systems › Brake Inspection & Service › Bleeding Power Brake Systems
The hydraulic system should operate without air in the fluid as should…
Aviation Maintenance Technician Handbook - Airframe p. 13-68
Chapter 13: Aircraft Landing Gear Systems › Brake Inspection & Service › Bleeding Master Cylinder Brake Systems
Figure 13-118. A typical brake bleeder pot or tank contains pure…