Aviation Mechanic - General, Airframe, and Powerplant › II. Airframe › Task F. Hydraulic and Pneumatic Systems

AM.II.F.K5

Knowledge

Pneumatic system types and components.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - Airframe p. 12-49
Chapter 12: Hydraulic & Pneumatic Power Systems › High-Pressure Systems › Pneumatic System Components
Figure 12-74. Pneumatic orifice valve. Restrictors Restrictors are a type of…
Aviation Maintenance Technician Handbook - Airframe p. 12-5
Chapter 12: Hydraulic & Pneumatic Power Systems › Basic Hydraulic Systems › Open Center Hydraulic Systems
Operation of the system following actuation of the component depends on the…
Aviation Maintenance Technician Handbook - Airframe p. 12-51
Chapter 12: Hydraulic & Pneumatic Power Systems › Aircraft Pneumatic Systems › Low-Pressure Systems
deicing boot systems. Figure 12-77. Schematic of vane-type air pump. Pneumatic Power System Maintenance Maintenance of the pneumatic power system consists of servicing, troubleshooting, removal, and installation of components, and operational testing. The air compressor’s lubricating ... level is indicated by means of a sight gauge or dipstick. When refilling the compressor oil tank, the oil (type specified in the applicable instructions manual) is added until the specified level. After the oil is added, ensure that…