AM.II.K.S14
SkillInspect and check anti-collision, position, and landing lights for proper operation.
From the FAA library
- Chapter 9: Aircraft Electrical System › Exterior Lights › Landing & Taxi Lights
Each light may be controlled by a relay, or it may be connected directly into the electric circuit. On some aircraft, the landing light is mounted in the same area with a taxi light. [Figure 9-178] A sealed beam ... halogen, or high intensity xenon discharge lamp is used. Taxi lights are designed to provide illumination on the ground while taxiing or towing the aircraft to or from a runway, taxi strip, or in the hangar area. [Figure…
- Chapter 9: Aircraft Electrical System › Aircraft Lighting Systems
Aircraft Lighting Systems Aircraft lighting systems provide illumination for both exterior and interior use. Lights on the exterior provide illumination for such operations as landing at night, inspection of icing conditions, and safety from midair collision. Interior lighting provides illumination ... instruments, flight decks, cabins, and other sections occupied by crewmembers and passengers. Certain special lights, such as indicator and warning lights, indicate the operation status of equipment. Exterior Lights Position, anticollision, landing, and taxi lights are common examples of aircraft…
- Chapter 9: Aircraft Electrical System › Exterior Lights › Position Lights
Circuit breaker panel. On some types of installations, a switch in the flight deck provides for steady or flashing operation of the position lights. On many aircraft, each light unit contains a single lamp mounted on the surface ... aircraft. Other types of position light units contain two lamps and are often streamlined into the surface of the aircraft structure. The green light unit is always mounted at the extreme tip of the right wing. The red unit…