Aviation Mechanic - General, Airframe, and Powerplant › II. Airframe › Task K. Aircraft Electrical Systems

AM.II.K.S1

Skill

Inspect aircraft wiring to verify installation and routing.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - Airframe p. 2-58
Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Aircraft Inspection › Performing an Airframe Conformity & Airworthiness Inspection
service bulletins are incorporated directly or by reference into an FAA-approved inspection program, such as an approved aircraft inspection program (AAIP) or continuous aircraft maintenance program (CAMP). 4. The service bulletins are listed as an additional maintenance requirement ... published by the FAA as amendments to 14 CFR part 39, section 39.13. They apply to the following products: aircraft, aircraft engines, propellers, and appliances. The FAA issues airworthiness directives when an unsafe condition exists in a product…
Aviation Maintenance Technician Handbook - Airframe p. 9-77
Chapter 9: Aircraft Electrical System › Wire Installation & Routing › Wire Groups & Bundles & Routing
Wire Installation & Routing Open Wiring Interconnecting wire is used in point-to-point open harnesses, normally in the interior or pressurized fuselage, with each wire providing enough insulation to resist damage from handling and service exposure. Electrical wiring is often ... installed in aircraft without special enclosing means. This practice is known as open wiring and offers the advantages of ease of maintenance and reduced weight. Figure 9-126. Laser wire printer. Figure 9-127. Alternate method of identifying wire bundles…
Aviation Maintenance Technician Handbook - Airframe p. 2-66
Chapter 2: Aerodynamics, Aircraft Assembly, & Rigging › Other Aircraft Inspection & Maintenance Programs › Light Sport Aircraft & Aircraft Certificated as Experimental
operator of a turbine-powered helicopter can elect to have it inspected under 14 CFR part 91, section 91.409: Annual inspection. 2. 100-hour inspection, when being used for compensation or hire. 3. A progressive inspection, when authorized ... inspection program listed under 14 CFR part 91, section 91.409 (f), when selected by the owner/ operator and the selection is recorded in the aircraft maintenance records (14 CFR part 91, section 91.409(e)). When performing any of the above…