AM.II.K.S7
SkillInstall airframe electrical wiring, switches, or protective devices.
From the FAA library
- Chapter 4: Engine Ignition & Electrical Systems › Electrical Equipment Installation › Circuit Protection Devices
exceeded, unless some type of effective monitoring means is provided to keep the load within prescribed limits. Circuit Protection Devices Conductors should be protected with circuit breakers or fuses located as close as possible to the electrical power source ... fuse should open the circuit before the conductor emits smoke. To accomplish this, the time/current characteristic of the protection device must fall below that of the associated conductor. Circuit protector characteristics should be matched to obtain the maximum utilization…
- Chapter 12: Fundamentals of Electricity & Electronics › Circuit Protection Devices
caused by excessive current, several kinds of protective devices are installed in the systems. Fuses, circuit breakers, thermal protectors, and arc fault circuit breakers are used for this purpose. Circuit protective devices, as the name implies, all have a common ... designed primarily to protect the wiring and to open the circuit in such a way as to stop the current flow when the current becomes greater than the wires can safely carry. Other devices are designed to protect a unit…
- Chapter 4: Engine Ignition & Electrical Systems › Electrical Equipment Installation › Electrical Load Limits
circuit protection devices are subjects with which mechanics must be familiar to properly install and maintain aircraft electrical systems. Electrical Load Limits When installing additional electrical equipment that consumes electrical power in an aircraft, the total electrical load must ... circuit-protection devices, such as fuses or circuit breakers, should be checked to determine that the new electrical load—previous maximum load plus added load—does not exceed the rated limits of the existing wires, cables, or protection devices…