AM.III.A.R3
Risk managementActions in the event of a reciprocating engine fire.
From the FAA library
- Chapter 9: Engine Fire Protection Systems › Boeing 777 Aircraft Fire Detection & Extinguishing System › Engine Fire Switches
Engine Fire Switches The engine fire panel is in the flight deck on the P8 aisle stand. The engine fire panel has a fire switch for each engine and a discharge light for each fire bottle. [Figure ... engine fire switch has four functions: Gives an indication of an engine fire, • Stops the engine, • Isolates the engine from the aircraft systems, and • Controls the engine fire extinguishing system. The fire switch assembly incorporates a solenoid that locks…
- Chapter 8: Engine Removal & Replacement › Engine Mounts › Mounts for Reciprocating Engines
This stress is torsional and affects all bolts, not just the top bolts. A typical engine mount ring shown in Figure 8-16 discloses fittings and attachment points located at four positions on the engine mount structure. Each fitting houses ... dynamic engine mount. The section of an engine mount where the engine is attached is known as the engine mount ring. It is usually constructed of steel tubing having a larger diameter than the rest of the mount structure…
- Chapter 8: Engine Removal & Replacement › Reasons for Removal of Reciprocating Engines › Engine Operational Problems
Turbine Engine Condition Monitoring Programs Many turbine engines are monitored by an engine condition program that helps determine the health of the engine in service. This can also be called trend analysis performance monitoring, but it consists mainly of monitoring ... certain engine parameters daily and watching for trend shifts or changes in the engine parameters. A shift in key parameters (change over time) could be a warning that the engine has serious internal deterioration and should be overhauled. Engine Operational…