Aviation Mechanic - General, Airframe, and Powerplant › III. Powerplant › Task B. Turbine Engines

AM.III.B.K5

Knowledge

Turbine engine troubleshooting, maintenance, and inspection procedures.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aviation Maintenance Technician Handbook - Powerplant p. 10-59
Chapter 10: Engine Maintenance & Operation › Turboprop Operation
Turboprop engine operation is quite similar to that of a turbojet engine…
Aviation Maintenance Technician Handbook - Powerplant p. 4-45
Chapter 4: Engine Ignition & Electrical Systems › Turbine Ignition System Inspection & Maintenance › Check System Operation
Inspection & Maintenance Maintenance of the typical turbine engine ignition system consists primarily of inspection, test, troubleshooting, removal, and installation. Inspection Inspection of the ignition system normally includes the following: Figure 4-75. Igniter plugs. • Ignition lead terminal inspection; ceramic terminal ... engine begins to turn, driven by the starter. Though the following procedure is not common practice and should only be used when the maintenance manual suggests it as an alternative method, the igniter can also be checked by removing…
Aviation Maintenance Technician Handbook - Powerplant p. 1-36
Chapter 1: Aircraft Engines › Gas Turbine Engines › Types & Construction
These differences are reflected in the applicable maintenance manuals. One of the greatest single factors influencing the construction features of any gas turbine engine is the type of compressor or compressors for which the engine is designed. Four types ... turbine engines are used to propel and power aircraft. They are the turbofan, turboprop, turboshaft, and turbojet. The term “turbojet” was used to describe any gas turbine engine used in aircraft. As gas turbine technology evolved, these other engine types…