AM.III.B.S5
SkillRemove and install a fuel nozzle in a turbine engine.
From the FAA library
- Chapter 2: Engine Fuel & Fuel Metering Systems › Engine Fuel System Components › Simplex Fuel Nozzle
fuel nozzle must present a fine spray with the correct pattern and optimum atomization. Simplex Fuel Nozzle The simplex fuel nozzle was the first nozzle type used in turbine engines and was replaced in most installations with the duplex nozzle…
- Chapter 10: Engine Maintenance & Operation › Turbine Engine Calibration & Testing › Turbine Engine Analyzer Uses
Turbine Engine Calibration & Testing Turbine Engine Analyzer Uses when the engine is running. However, the turbine wheels are relatively massive, compared with the case, and are not cooled so readily. The turbine case is exposed to cooling air from both ... inside and outside the engine. Consequently, the case and the wheels lose their residual heat at different rates after the engine has been shut down. The case, cooling faster, tends to shrink upon the wheels, that are still rotating. Under…
- Chapter 2: Engine Fuel & Fuel Metering Systems › Basic Fuel System
During starting, the boost pump forces fuel through a bypass in the engine-driven pump to the metering device. Once the engine-driven pump is rotating at sufficient speed, it takes over and delivers fuel to the metering device ... specified pressure. The airframe fuel system begins with the fuel tank and ends at the engine fuel system. The engine fuel system usually includes the engine-driven pumps and the fuel metering systems. In aircraft powered with a reciprocating engine…