Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 9: Engine Fire Protection Systems › Boeing 777 Aircraft Fire Detection & Extinguishing System › Engine Fire Switches

    Engine Fire Switches The engine fire panel is in the flight deck on the P8 aisle stand. The engine fire panel has a fire switch for each engine and a discharge light for each fire bottle. [Figure ... engine fire switch has four functions: Gives an indication of an engine fire, • Stops the engine, • Isolates the engine from the aircraft systems, and • Controls the engine fire extinguishing system. The fire switch assembly incorporates a solenoid that locks…

  • Chapter 7: Aircraft Systems › Electrical System

    Electrical System Most aircraft are equipped with either a 14- or a 28-volt direct current (DC) electrical system. A basic aircraft electrical system consists of the following components: Alternator/generator Battery Master/battery switch • Alternator/generator switch • Bus bar, fuses, and circuit ... breakers • Voltage regulator • Ammeter/loadmeter • Associated electrical wiring Engine-driven alternators or generators supply electric current to the electrical system. They also maintain a sufficient electrical charge in the battery. Electrical energy stored in a battery provides a source of electrical…

  • Chapter 4: Engine Ignition & Electrical Systems › Powerplant Electrical Systems › Electrical Wiring Installation

    Electrical Wiring Installation The following recommended procedures for installing aircraft electrical wiring are typical of those used on most types of aircraft. For purposes of this discussion, the following definitions are applicable: 1. Open wiring—any wire, wire group ... wire bundle not enclosed in conduit. 2. Wire group—two or more wires in the same location, tied together to identity the group. 3. Wire bundle—two or more wire groups tied together because they are going in the same…