AM.III.F.S4
SkillInspect an engine-driven generator or alternator in accordance with manufacturer’s instructions.
From the FAA library
- Chapter 8: Engine Removal & Replacement › Engine Preservation & Return to Service
pump adapters (if applicable), propeller hub attaching bolts (if applicable), starters, generators, vacuum pumps, hydraulic pumps, propeller governors, and engine-driven fuel pumps. 1. Remove seals and all desiccant bags. 2. Remove cylinder dehydrators and plugs or spark plugs from…
- 14 CFR § 91.403 General.
which a manufacturer's maintenance manual or instructions for continued airworthiness has been issued that contains an airworthiness limitations section unless the mandatory replacement times, inspection intervals, and related procedures specified in that section or alternative inspection intervals and related ... forth in an operations specification approved by the Administrator under part 121 or 135 of this chapter or in accordance with an inspection program approved under § 91.409(e) have been complied with. (d) A person must not alter an aircraft…
- Chapter 9: Flight Manuals and Other Documents › Preventive Maintenance › Examples of Preventive Maintenance
Maintenance The following examples of preventive maintenance are taken from 14 CFR, part 43, Maintenance, Preventive Maintenance, Rebuilding, and Alternation, which should be consulted for a more in-depth look at the preventive maintenance a pilot can perform ... case of balloons, the making of small fabric repairs to envelopes (as defined in, and in accordance with, the balloon manufacturer’s instructions) not requiring load tape repair or replacement…