AM.III.K.K6
KnowledgeTurbine engine induction system theory, components, and operation.
From the FAA library
- Chapter 6: Lubrication & Cooling Systems › Turbine Engine Lubrication Systems
Turbine Engine Lubrication Systems Both wet- and dry-sump lubrication systems are used in gas turbine engines. Wet-sump engines store the lubricating oil in the engine proper, while dry-sump engines utilize an external tank mounted on the engine ... somewhere in the aircraft structure near the engine, similar to reciprocating piston engines mentioned earlier. Turbine engine’s oil systems can also be classified as a pressure relief system that maintains a somewhat constant pressure: the full flow type…
- Chapter 3: Induction & Exhaust Systems › Basic Carburetor Induction System › Induction System Icing
Induction System Icing A short discussion concerning the formation and location of induction system ice is helpful, even though a technician is not normally concerned with operations that occur when the aircraft is in flight. [Figure 3-7] Technicians should ... know something about induction system icing because of its effect on engine performance and troubleshooting. Even when an inspection shows that everything is in proper working order and the engine performs perfectly on the ground, induction system ice can cause…
- Chapter 3: Induction & Exhaust Systems › Reciprocating Engine Induction Systems › Supercharged Induction Systems
Induction System Troubleshooting Figure 3-8 provides a general guide to the most common induction system troubles. Supercharged Induction Systems Since aircraft operate at altitudes where the air pressure is lower, it is useful to provide a system for compressing ... fuel mixture. Some systems are used to normalize the air pressure entering the engine. These systems are used to regain the air pressure lost by the increase in altitude. This type of system is not a ground boost system…