CA.IX.D.R1
Risk managementSurvival gear (water, clothing, shelter) for 48 to 72 hours.
From the FAA library
- Chapter 12: Transition to Complex Airplanes › Retractable Landing Gear › Landing Gear Safety Devices
Landing Gear Safety Devices Most airplanes with a retractable landing gear have a gear warning horn that sounds when the airplane is configured for landing and the landing gear is not down and locked. Normally, the horn is linked ... airspeed indicator so that when the airplane is below a certain airspeed, configuration, or power setting with the gear retracted, the warning horn sounds. Accidental retraction of a landing gear may be prevented by such devices as mechanical downlocks, safety…
- Chapter 2: Ground Operations › Preflight Assessment of the Aircraft › Landing Gear, Tires, and Brakes
Landing Gear, Tires, and Brakes The landing gear, tires, and brakes allow the airplane to maneuver from and return to the ramp, taxiway, and runway environment in a precise and controlled manner. The landing gear, tires, and brakes should ... inspected to ensure that the airplane can be positively controlled on the ground. Landing gear on airplanes varies from simple fixed gear to complex retractable gear systems. Fixed landing gear is a gear system in which the landing gear struts…
- Chapter 12: Transition to Complex Airplanes › Retractable Landing Gear › Emergency Gear Extension Systems
airplanes have an emergency release handle in the flight deck, which is connected through a mechanical linkage to the gear uplocks. When the handle is operated, it releases the uplocks and allows the gear to free fall or extend under ... which is directed to uplock release cylinders. In some airplanes, design configurations make emergency extension of the landing gear by gravity and air loads alone impossible or impractical. In these airplanes, provisions are included for forceful gear extension…
- Chapter 12: Transition to Complex Airplanes › Retractable Landing Gear › Landing Gear Systems
Landing Gear Systems An electrical landing gear retraction system utilizes an electrically-driven motor for gear operation. The system is basically an electrically-driven jack for raising and lowering the gear. When a switch in the flight deck is moved ... position, the electric motor operates. Through a system of shafts, gears, adapters, an actuator screw, and a torque tube, a force is transmitted to the drag strut linkages. Thus, the gear retracts and locks. Struts are also activated that open…
- Chapter 12: Transition to Complex Airplanes › Retractable Landing Gear › Approach and Landing
This is especially so in cases of premature lift-off. Remember that leaning forward to reach the landing gear selector may result in inadvertent forward pressure on the yoke, which causes the airplane to descend. As the landing gear retracts ... airspeed increases and the airplane’s pitch attitude may change. The gear may take several seconds to retract. Gear retraction and locking (and gear extension and locking) is accompanied by sound and feel that are unique to the specific make…
- Chapter 13: Aircraft Landing Gear Systems › Landing Gear Safety Devices › Landing Gear Position Indicators
There is usually an amber in transit light to indicate a gear that is in transition. Landing gear position indicators are located on the instrument panel adjacent to the gear selector handle. They are used to inform the pilot ... gear position status. There are many arrangements for gear indication. Usually, there is a dedicated light for each gear. The most common display for the landing gear being down and locked is an illuminated green light. Three green lights means…