CH.IX.A.S6
SkillSelect a suitable approach path, termination point, and departure path.
From the FAA library
- Chapter 10: Advanced Flight Maneuvers › Confined Area Operations › Approach
Fixing the departure azimuth or heading on the compass is a good technique to use. This ensures that the pilot is able to take off over the preselected departure path when it is not visible while sitting in the confined ... knots or greater, expect updrafts on the windward side and downdrafts on the lee side of obstacles. Plan the approach with these factors in mind, but be ready to alter plans if the wind speed or direction changes. Approach…
- Chapter 13: Effective Aeronautical Decision-Making › Risk Management › Using the 3P Model to Form Good Safety Habits
further mitigate this risk the pilot has selected mental checkpoints along the approach path that will serve as go/no-go points should the pilot feel any assessed parameter is being exceeded. Wind direction and velocity are assessed as a medium risk ... because (for this scenario) the direction of the wind is slightly offset from the chosen approach path, creating a 15–20° crosswind with a steady 10-knot wind. The pilot also takes into consideration that, due to the terrain…
- Chapter 7: Automation & Flight Path Management › Balancing Automated & Manual Flight
most common errors is failing to move to lower levels of automation suitable to a changing environment. 12292 For example, a pilot may track an approach course adequately using manual control inputs. However, the pilot may also need to listen ... record the Automatic Terminal Information Service (ATIS), retrieve and load an instrument approach procedure, prepare for the instrument approach, and accomplish the appropriate checklists. These tasks will increase workload and divert pilot attention from monitoring and controlling the flight path…
- Chapter 10: Advanced Flight Maneuvers › Steep Approach › Technique
cyclic is required to decelerate sooner than with a normal approach, and the rate of closure becomes apparent at a higher altitude. Maintain the approach angle and rate of descent with the collective, rate of closure with the cyclic ... feet above ground level (AGL), the antitorque pedals should be adjusted to align the helicopter with the intended touchdown point. Visualize the location of the tail rotor behind the helicopter and fly the landing gear to 3 feet above…
- Chapter 10: Advanced Flight Maneuvers › Confined Area Operations › Takeoff
wide margin but with a dangerously low rpm and no power reserve. Always make the landing to a specific point and not to some general area. This point should be located well forward, away from the approach ... more confined the area is, the more essential it is that the helicopter land precisely at a definite point. Keep this point in sight during the entire final approach. When flying a helicopter near obstacles, always consider the tail rotor…
- Chapter 10: IFR Flight › Approach to an Airport With an Operating Tower, With an Approach Control › Radar Monitoring of Instrument Approaches
Radar service is automatically terminated at the completion of a radar approach. No-Gyro Approach is available to a pilot under radar control who experiences circumstances wherein the directional gyro or other stabilized compass is inoperative or inaccurate. When this ... occurs, the pilot should so advise ATC and request a no-gyro vector or approach. The pilot of an aircraft not equipped with a directional gyro or other stabilized compass who desires radar handling may also request a no-gyro…