CH.V.A.S11

From the FAA library

• Aeronautical Information Manualp. 5-2-11
  Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-9. Instrument Departure Procedures (DP) - Obstacle Departure Procedures (ODP), Stan…

  departure planning (see AC 120-91). 5. Climb gradients greater than 200 FPNM are specified when required to support procedure design constraints, obstacle clearance, and/or airspace restrictions. Compliance with a climb gradient for these purposes is mandatory when the procedure ... climb of at least 280 FPNM is required to 2500 and is mandatory when the departure procedure is included in the ATC clearance. NOTE-Some SIDs still retain labeled “ATC” climb gradients published or have climb gradients that are established…

• Airplane Flying Handbookp. 6-14
  Chapter 6: Takeoffs and Departure Climbs › Noise Abatement

  abatement procedures, reminder signs may be installed at the taxiway hold positions for applicable runways to remind pilots to use and comply with noise abatement procedures on departure. Pilots who are unfamiliar with these procedures should ask the tower…

• Small Unmanned Aircraft System (Small UAS)p. 6-2
  CHAPTER 6. PART 107 SUBPART C, REMOTE PILOT CERTIFICATION › 6.4 Application Process › 6.4.1 Remote Pilot Applicants Without Part 61 Certificates

  Once the applicant completes the online application in IACRA, the applicant signs the application electronically and submits it to the Airman Registry for processing. No FAA representative will be required to sign the application if the applicant was able ... self-certify. Note: When an applicant seeking a Remote Pilot Certificate uses this online option, the application transmits electronically from the applicant to the Airman Registry. The only electronic signature reflected on the IACRA application will be the applicant…