CH.V.G.S8
SkillUse runway incursion avoidance procedures, if applicable.
From the FAA library
- Chapter 14: Airport Operations › Collision Avoidance › Runway Incursion Avoidance
preflight planning, before descending to land and while taxiing, as needed. • Know airport signage. • Review NOTAM for information on runway/ taxiway closures and construction areas. • Request progressive taxi instructions from ATC when unsure of the taxi route. • Check for traffic ... before crossing any runway hold line and before entering a taxiway. • Turn on aircraft lights and the rotating beacon or strobe lights while taxing. • When landing, clear the active runway as soon as possible, then wait for taxi instructions before…
- Chapter 14: Airport Operations › Collision Avoidance › Clearing Procedures
Clearing Procedures The following procedures and considerations are in place to assist pilots in collision avoidance under various situations: • Before takeoff—prior to taxiing onto a runway or landing area in preparation for takeoff, pilots should scan the approach area ... airspace. • Straight and level—during sustained periods of straight-and-level flight, a pilot should execute appropriate clearing procedures at periodic intervals. • Traffic patterns—entries into traffic patterns while descending should be avoided. • Traffic at VOR sites—due to converging…
- Chapter 17: Aeromedical Factors › Health and Physiological Factors Affecting Pilot Performance › Runway Width Illusion
Runway Width Illusion A narrower-than-usual runway can create an illusion that the aircraft is at a higher altitude than it actually is, especially when runway length-to-width relationships are comparable. [Figure 17-7] The pilot who does ... lower approach, with the risk of striking objects along the approach path or landing short. A wider-thanusual runway can have the opposite effect with the risk of the pilot leveling out the aircraft high and landing hard or overshooting…
- Chapter 14: Airport Operations › Collision Avoidance › Pilot Deviations (PDs)
pilot deviation (PD) is an action of a pilot that violates any Federal Aviation Regulation. While PDs should be avoided, the regulations do authorize deviations from a clearance in response to a traffic alert and collision avoidance system resolution advisory ... different ways. Airborne deviations result when a pilot strays from an assigned heading or altitude or from an instrument procedure, or if the pilot penetrates controlled or restricted airspace without ATC clearance. To prevent airborne deviations, follow these steps: • Plan…
- Chapter 6: Threat and Error Management › Defenses Provided to the Pilot or Crew › Checklists, Standard Operating Procedures, and Best Practices
flight school may provide defenses to pilots. Examples include checklists, operating limitations, minimum pilot qualifications, standard operating procedures, and insurance requirements. Regardless of the flight mission, some defenses will always be predetermined. Checklists, Standard Operating Procedures, and Best Practices Like ... aircraft, its approved checklists are normally provided. The manufacturer’s approved checklists, placards, and emergency procedures provide a basic defense against threats, errors, or undesired aircraft states. Many flight schools, flying clubs, and larger flight departments may develop checklists…
- Chapter 8: Aviation Instructor Responsibilities and Professionalism › Flight Instructor Responsibilities › Ensuring Learner Skill Set
item included in the applicable ACS/ PTS. The ACS integrates risk management and safety throughout and with supplementary appendix information. PTS lists special emphasis items. Some common items include: 1. Positive aircraft control 2. Procedures for positive ... exchange of flight controls 3. Stall and spin awareness 4. Collision avoidance 5. Wake turbulence and low-level wind turbulence and wind shear avoidance 6. Runway incursion avoidance 7. Controlled flight into terrain (CFIT) 8. Aeronautical decision-making (ADM)/risk…