CH.X.A.R3
Risk managementAirport specific security procedures.
From the FAA library
- Chapter 14: Airport Operations
overall picture and gain an understanding of the weather that affects the safe completion of a flight. Chapter 14: Airport Operations Each time a pilot operates an aircraft, the flight normally begins and ends at an airport. An airport ... small sod field or a large complex utilized by air carriers. This chapter examines airport operations, identifies features of an airport complex, and provides information on operating on or in the vicinity of an airport. The definition for airports refers…
- Chapter 14: Airport Operations › Radio Communications › Lost Communication Procedures
Using Proper Radio Procedures Using proper radio phraseology and procedures contribute to a pilot’s ability to operate safely and efficiently in the airspace system. A review of the Pilot/Controller Glossary contained in the AIM assists a pilot ... communications. When communicating with ATC, pilots should use this alphabet to identify their aircraft. [Figure 14-41] Lost Communication Procedures It is possible that a pilot might experience a malfunction of the radio. This might cause the transmitter, receiver…
- Chapter 14: Airport Operations › Airport Lighting › Airport Beacon
pilot with information on areas that cannot be seen from the control tower, applicable radio frequencies, and noise abatement procedures. The airport operator determines the need, size, and location of these signs. • Runway distance remaining signs—black background with white ... numbers. The numbers indicate the distance of the remaining runway in thousands of feet. Airport Lighting The majority of airports have some type of lighting for night operations. The variety and type of lighting systems depends on the volume…
- Chapter 14: Airport Operations › Collision Avoidance › Clearing Procedures
Clearing Procedures The following procedures and considerations are in place to assist pilots in collision avoidance under various situations: • Before takeoff—prior to taxiing onto a runway or landing area in preparation for takeoff, pilots should scan the approach area ... airspace. • Straight and level—during sustained periods of straight-and-level flight, a pilot should execute appropriate clearing procedures at periodic intervals. • Traffic patterns—entries into traffic patterns while descending should be avoided. • Traffic at VOR sites—due to converging…
- Chapter 8: Ground Procedures and Flight Preparations › Safety in and Around Helicopters › After Landing and Securing
helicopter to roll or pitch, resulting in a rotor blade striking the tail boom or the ground. Good operating procedures dictate that, generally, pilots remain at the flight controls whenever the engine is running, and the rotors are turning ... well trained on setting controls and exiting the cockpit without disturbing the flight or power controls. After Landing and Securing When the flight is terminated, park the helicopter where it does not interfere with other aircraft…
- Chapter 5. Air Traffic Procedures › Section 6. National Security and Interception Procedures › 5-6-4. ADIZ Requirements
(e) State aircraft (U.S. or foreign) planning to operate through an ADIZ…