CP.IX.C.R6
Risk managementFactors and situations that could lead to loss of control with an inflight powerplant(s) failure.
From the FAA library
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness…
- Chapter 5: Aerodynamics of Flight › Axes of an Aircraft
right movement of the aircraft’s nose. The three motions of the conventional airplane (roll, pitch, and yaw) are controlled by three control surfaces. Roll is controlled by the ailerons; pitch is controlled by the elevators; yaw is controlled ... rudder. The use of these controls is explained in Chapter 6, Flight Controls. Other types of aircraft may utilize different methods of controlling the movements about the various axes. For example, weight-shift control aircraft control two axes (roll…
- Chapter 6: Flight Controls
addition, in some large and fast aircraft, controls are boosted by hydraulically or electrically actuated systems. In both the fly-by-wire and boosted controls, the feel of the control reaction is fed back to the pilot by simulated means ... Current research at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center involves Intelligent Flight Control Systems (IFCS). The goal of this project is to develop an adaptive neural network-based flight control system. Applied directly to flight…
- Chapter 3: Identifying Hazards & Associated Risks › Leading Accident Causes
Other The top four causes of general aviation fatal accidents include loss of control in-flight (LOC-I), controlled flight into terrain (CFIT), system component failure of the powerplant (SCF-PP), and fuel-related issues. These causes often signify ... thread. To begin with, pilots should recognize hazards linked to causes of aircraft accidents as presented below: 11806 1. Loss of Control In-flight (LOC-I)–Examples of loss of control scenarios include continued VFR into IMC, wake turbulence upsets…
- Chapter 5: Aerodynamics of Flight › Load Factors › Load Factors and Stalling Speeds
Load Factors and Stalling Speeds Any aircraft, within the limits of its structure, may be stalled at any airspeed. When a sufficiently high AOA is imposed, the smooth flow of air over an airfoil breaks up and separates, producing ... abrupt change of flight characteristics and a sudden loss of lift, which results in a stall. A study of this effect has revealed that an aircraft’s stalling speed increases in proportion to the square root of the load factor…
- Chapter 6. Emergency Procedures › Section 4. Two-way Radio Communications Failure › 6-4-1. Two-way Radio Communications Failure
Section 4. Two-way Radio Communications Failure 6-4-1. Two-way Radio Communications Failure a. It is virtually impossible to provide regulations and procedures applicable to all possible situations associated with two-way radio communications failure. During ... radio communications failure, when confronted by a situation not covered in the regulation, pilots are expected to exercise good judgment in whatever action they elect to take. Should the situation so dictate they should not be reluctant…