CP.IX.I.R1
Risk managementSurface conditions conducive to dynamic rollover.
From the FAA library
- Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Water on the Runway and Dynamic Hydroplaning
Water on the Runway and Dynamic Hydroplaning Water on the runways reduces the friction between the tires and the ground and can reduce braking effectiveness. The ability to brake can be completely lost when the tires are hydroplaning because ... layer of water separates the tires from the runway surface. This is also true of braking effectiveness when runways are covered in ice. When the runway is wet, the pilot may be confronted with dynamic hydroplaning. Dynamic hydroplaning…
- Chapter 2: Personal Minimums › Personal Minimums › Step 2—Assess Experience and Comfort Level
ceiling as 7,000 feet, and the lowest visibility as 15 miles. A pilot may never experience MVFR conditions and would leave the dash in place. However, in this example and as shown in Figure 2-3, the pilot regularly ... flies in an area where normal summer flying involves hazy conditions over relatively flat terrain and is more experienced and comfortable in MVFR. The pilot used the MVFR column to record personal minimums of a 2,500-foot ceiling…
- Chapter 5: Aerodynamics of Flight › Aircraft Design Characteristics › Dynamic Stability
being disturbed. [Figure 5-21] • Neutral static stability—the initial tendency of the aircraft to remain in a new condition after its equilibrium has been disturbed. [Figure 5-21] • Negative static stability—the initial tendency of the aircraft to continue ... away from the original state of equilibrium after being disturbed. [Figure 5-21] Dynamic Stability Static stability has been defined as the initial tendency to return to equilibrium that the aircraft displays after being disturbed from its trimmed condition. Occasionally…
- Chapter 2: Personal Minimums › Personal Minimums › Step 3—Consider Other Conditions
this example, the pilot did not fill in the LIFR boxes for known “comfort level” in instrument meteorological conditions (IMC) after deciding to avoid flight in those conditions. 12402 Experience and “Comfort Level” Assessment Figure 2-4. A sample pilot ... single table, the summary of a pilot’s known “comfort level” for VFR, MVFR, IFR, and LIFR weather conditions might appear as shown in Figure 2-5. Figure 2-5. Experience and comfort level assessment for combined…
- Chapter 2: Personal Minimums › Personal Minimums › Step 5—Adjust for Specific Conditions
table as shown in Figure 2-8. Figure 2-8. Sample baseline personal minimums. Step 5—Adjust for Specific Conditions Any flight a pilot makes involves an infinite combination of pilot skill, experience, conditions, and proficiency. Aircraft equipment and performance ... environmental conditions, and external influences vary considerably. Both individually and in combination, these factors can compress or expand the safety buffer provided by baseline personal minimums. Consequently, a pilot should develop a practical way to adjust baseline personal minimums…
- Chapter 6: Flight Controls › Flight Control Systems › Servo Tabs
airflow striking the tab counterbalances some of the air pressure against the primary control surface and enables the pilot to move the control more easily and hold the control surface in position. If the linkage between the balance ... fixed surface is adjustable from the flight deck, the tab acts as a combination trim and balance tab that can be adjusted to a desired deflection. Servo Tabs Servo tabs are very similar in operation and appearance to the trim…