Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 10: Weight and Balance › Determining Loaded Weight and CG › Weight Shifting

    compartments, weight may be shifted from one to the other to change the CG. If starting with a known aircraft weight, CG, and total moments, calculate the new CG (after the weight shift) by dividing the new total moments ... total aircraft weight. Figure 10-10. Sample weight and balance using a negative. Figure 10-11. Sample weight and balance using an aircraft with a published zero fuel weight…

  • Chapter 10: Weight and Balance › Effects of Weight

    particular aircraft being flown. Preflight planning should include a check of performance charts to determine if the aircraft’s weight may contribute to hazardous flight operations. Excessive weight in itself reduces the safety margins available to the pilot and becomes ... fails on takeoff or airframe ice forms at low altitude, it is usually too late to reduce an aircraft’s weight to keep it in the air. Weight Changes The operating weight of an aircraft can be changed by simply…

  • Chapter 11: Aircraft Performance › Performance › Climb Performance Factors

    maximum ROC performance decreases under any of these conditions. Weight has a very pronounced effect on aircraft performance. If weight is added to an aircraft, it must fly at a higher AOA to maintain a given altitude and speed. This ... weight, since it has such a marked effect on the factors pertaining to performance. A change in an aircraft’s weight produces a twofold effect on climb performance. First, a change in weight changes the drag and the power required…

  • Chapter 16: Navigation › Flight Planning › Airplane Flight Manual or Pilot’s Operating Handbook (AFM/POH)

    Aircraft Flight Manual or Pilot’s Operating Handbook (AFM/POH) should be checked to determine the proper loading of the aircraft (weight and balance data). The weight of the usable fuel and drainable oil aboard must be known. Also, check ... weight of the passengers, the weight of all baggage to be carried, and the empty weight of the aircraft to be sure that the total weight does not exceed the maximum allowable weight. The distribution of the load must…

  • Chapter 10: Weight and Balance › Control › Management of Weight and Balance Control

    minor items of equipment such as nuts, bolts, washers, rivets, and similar standard parts of negligible weight on fixed-wing aircraft do not require a weight and balance check. The following criteria for negligible weight change is outlined in Advisory ... revised), Methods Techniques and Practices—Aircraft Inspection and Repair: • One pound or less for an aircraft whose weight empty is less than 5,000 pounds • Two pounds or less for aircraft with an empty weight of more than…

  • Chapter 6: Aircraft Weight & Balance › Weight & Balance Terminology › Maximum Weight

    ground. This is sometimes referred to as the maximum taxi weight. • Maximum Takeoff Weight—the heaviest weight an aircraft can be when it starts the takeoff roll. The difference between this weight and the maximum ramp weight would equal ... weight of the fuel that would be consumed prior to takeoff. • Maximum Landing Weight—the heaviest weight an aircraft can be when it lands. For large, wide body commercial airplanes, it can be 100,000 lb less than maximum takeoff…