CP.V.G.S8
SkillMake smooth, timely, and correct control application during round out and touchdown.
From the FAA library
- Chapter 7. Safety of Flight › Section 2. Barometric Altimeter Errors and Setting Procedures › 7-3-5. Cold Temperature Airport Procedures
Cold Temperature Airport Procedures a. PILOTS MUST NOT MAKE AN ALTIMETER CHANGE to accomplish an altitude correction. Pilots must ensure that the altimeter is set to the current altimeter setting provided by ATC in accordance with ... Actions on when and where to make corrections: Pilots will make an altitude correction to the published, “at”, “at or above”, and “at or below” altitudes on all designated segment(s) to all runways for all published instrument approach procedures…
- Chapter 4. Air Traffic Control › Section 1. Services Available to Pilots › 4-1-8. Approach Control Service for VFR Arriving Aircraft
Operation Rain Check Operation Rain Check is a program designed and managed by local air traffic control facility management. Its purpose is to familiarize pilots and aspiring pilots with the ATC system, its functions, responsibilities and benefits ... Approach Control Service for VFR Arriving Aircraft a. Numerous approach control facilities have established programs for arriving VFR aircraft to contact approach control for landing information. This information includes: wind, runway, and altimeter setting at the airport of intended landing…
- Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-7. Departure Restrictions, Clearance Void Times, Hold for Release, and Release Times
Departure Restrictions, Clearance Void Times, Hold for Release, and Release Times a. ATC may assign departure restrictions, clearance void times, hold for release, and release times, when necessary, to separate departures from other traffic or to restrict or regulate ... departure flow. Departures from an airport without an operating control tower must be issued either a departure release (along with a release time and/or void time if applicable), or a hold for release. 1. Clearance Void Times. A pilot…
- Chapter 5: Aerodynamics of Flight › Axes of an Aircraft
right movement of the aircraft’s nose. The three motions of the conventional airplane (roll, pitch, and yaw) are controlled by three control surfaces. Roll is controlled by the ailerons; pitch is controlled by the elevators; yaw is controlled ... rudder. The use of these controls is explained in Chapter 6, Flight Controls. Other types of aircraft may utilize different methods of controlling the movements about the various axes. For example, weight-shift control aircraft control two axes (roll…
- Chapter 4. Air Traffic Control › Section 1. Services Available to Pilots › 4-1-17. Radar Assistance to VFR Aircraft
Aircraft Conflict Alert. 1. Controllers will immediately issue an alert to the pilot of an aircraft under their control if they are aware of another aircraft which is not under their control, at an altitude which, in the controller ... judgment, places both aircraft in unsafe proximity to each other. With the alert, when feasible, the controller will offer the pilot the position of the traffic if time permits and an alternate course(s) of action. Any alternate course…
- CHAPTER 6. PART 107 SUBPART C, REMOTE PILOT CERTIFICATION › 6.4 Application Process › 6.4.1 Remote Pilot Applicants Without Part 61 Certificates
Once the applicant completes the online application in IACRA, the applicant signs the application electronically and submits it to the Airman Registry for processing. No FAA representative will be required to sign the application if the applicant was able ... self-certify. Note: When an applicant seeking a Remote Pilot Certificate uses this online option, the application transmits electronically from the applicant to the Airman Registry. The only electronic signature reflected on the IACRA application will be the applicant…