FH.II.H.S2
SkillCorrectly identify airspace and operate in accordance with associated communication and equipment requirements.
From the FAA library
- Chapter 15: Airspace › Air Traffic Control and the National Airspace System › Operating Rules and Pilot/Equipment Requirements
radio communications must be established and maintained with the ATC facility providing air traffic services Private—(However, a student or recreational pilot may operate at other than the primary airport if seeking private pilot certification and if regulatory requirements ... Figure 15-9. Requirements for airspace operations. prior to entering the airspace and thereafter maintained while within the airspace. A pilot departing from the primary airport or satellite airport with an operating control tower must establish and maintain…
- Chapter 3. Airspace › Section 2. Controlled Airspace › 3-2-4. Class C Airspace
NOTE-See paragraph 4-1-20, Transponder and ADS-B Out Operation, subparagraph f for Mode C transponder/ ADS-B requirements for operating above Class C airspace. 3. Arrival or Through Flight Entry Requirements. Two-way radio communication must ... established with the ATC facility providing ATC services prior to entry and thereafter maintain those communications while in Class C airspace. Pilots of arriving aircraft should contact the Class C airspace ATC facility on the publicized frequency and give their…
- Chapter 15: Airspace › Controlled Airspace › Class C Airspace
Class C Airspace Class C airspace is generally airspace from the surface to 4,000 feet above the airport elevation (charted in MSL) surrounding those airports that have an operational control tower, are serviced by a radar approach control ... have a certain number of IFR operations or passenger enplanements. Although the configuration of each Class C area is individually tailored, the airspace usually consists of a surface area with a five NM radius, an outer circle with…
- Chapter 3. Airspace › Section 1. General › 3-1-3. Hierarchy of Overlapping Airspace Designations
complexity or density of aircraft movements, 2. The nature of the operations conducted within the airspace, 3. The level of safety required, and 4. The national and public interest. d. It is important that pilots be familiar with the operational ... requirements for each of the various types or classes of airspace. Subsequent sections will cover each class in sufficient detail to facilitate understanding. 3-1-2. General Dimensions of Airspace Segments Refer to Title 14 of the U.S. Code…
- Chapter 3. Airspace › Section 2. Controlled Airspace › 3-2-6. Class E Airspace
Class E Airspace a. Definition. Class E airspace is controlled airspace that is designated to serve a variety of terminal or en route purposes as described in this paragraph. b. Operating Rules and Pilot/Equipment Requirements: 1. Pilot Certification. No specific ... certification required. 2. Equipment. Unless otherwise authorized by ATC: (a) An operable radar beacon transponder with automatic altitude reporting capability and operable ADS-B Out equipment are required at and above 10,000 feet MSL within the 48 contiguous states…
- Chapter 2: Airspace Classification, Operating Requirements, and Flight Restrictions › Special Use Airspace
Some Class E airspace begins at an MSL altitude depicted on the charts, instead of an AGL altitude. Class E airspace typically extends up to, but not including, 18,000 feet MSL (the lower limit of Class A airspace ... airspace above FL 600 is Class E airspace. Federal Airways, which are shown as blue lines on a sectional chart, are usually found within Class E airspace. Federal Airways start…