Tutor Platform

FH.II.J.K5a

Knowledge

Calculating:

Time, climb and descent rates, course, distance, heading, pressure altitude, density altitude, true airspeed, and groundspeed

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • 14 CFR § 91.1057 Flight, duty and rest time requirements: All crewmembers.

    Flight, duty and rest time requirements: All crewmembers. (a) For purposes of this subpart— Augmented flight crew means at least three pilots. Calendar day means the period of elapsed time, using Coordinated Universal Time or local time that begins ... midnight and ends 24 hours later at the next midnight. Duty period means the period of elapsed time between reporting for an assignment involving flight time and release from that assignment by the program manager. All time between these…

  • Chapter 16: Navigation › Filing a VFR Flight Plan

    determined to be 106 knots. Based on this information, the total trip time, as well as time between checkpoints, and the fuel burned can be determined. These numbers can be calculated by using a manual or electronic calculator. For this ... trip, the GS is 106 knots and the total time is 35 minutes (30 minutes plus 5 minutes for climb) with a fuel burn of 4.7 gallons. Refer to the flight log in Figure 16-26 for the time between…

  • Chapter 9: Basic Flight Maneuvers › Normal Climb › Technique

    Normal Climb The entry into a climb from a hover has already been described in the Normal Takeoff from a Hover subsection; therefore, this discussion is limited to a climb entry from cruising flight. Technique To enter a climb ... helicopter while maintaining airspeed, the first actions are increasing the collective and throttle, and adjusting the pedals as necessary to maintain a centered ball in the slip/skid indicator. Moving the collective up requires a slight aft movement of the cyclic…

  • Chapter 7: Helicopter Performance › Sample Hover Problem 3 › Climb Performance

    determine what torque is required to hover. Use the following conditions: First, enter the chart at 9,500 feet pressure altitude, then move right to outside air temperature, 0 °C. From that point, move down to 4,250 pounds gross ... then move left to 5-foot skid height. Drop down to read 66 percent torque required to hover. Climb Performance Figure 7-6. Torque required for cruise or level flight. Most of the factors affecting hover and takeoff performance also…

  • Chapter 16: Navigation › Latitude and Longitude (Meridians and Parallels) › Time Zones

    Mountain Standard Time, and 10 a.m. Pacific Standard Time. When Daylight Saving Time is in effect, generally between the second Sunday in March and the first Sunday in November, the sun is directly above the 75th meridian at noon, Central ... Daylight Time. These time zone differences must be taken into account during long flights eastward—especially if the flight must be completed before dark. Remember, an hour is lost when flying eastward from one time zone to another, or perhaps…

  • Chapter 11: Helicopter Emergencies and Hazards › Autorotation

    Therefore, autorotative descents at very low or very high airspeeds are more critical than those performed at the minimum rate of descent airspeed. Refer to the height/velocity diagram discussion in Chapter 7, Helicopter Performance. Each type of helicopter ... specific airspeed and rotor rpm at which a power-off glide is most efficient. The specific airspeed is somewhat different for each type of helicopter, but certain factors affect all configurations in the same manner. In general, rotor rpm maintained…