FH.VII.B.K8

From the FAA library

• Pilot's Handbook of Aeronautical Knowledgep. 9-13
  Chapter 10: Weight and Balance

  such as ADs, provide pilots with ready access to pertinent information needed to safely fly a particular aircraft. By understanding the operations, limitations, and performance characteristics of the aircraft, the pilot can make educated flight decisions. By learning what preventive ... reach that goal. Chapter 10: Weight and Balance Compliance with the weight and balance limits of any aircraft is critical to flight safety. Operating above the maximum weight limitation compromises the structural integrity of an aircraft and adversely affects…

• Pilot's Handbook of Aeronautical Knowledgep. 9-12
  Chapter 9: Flight Manuals and Other Documents › Examples of Preventive Maintenance › Special Flight Permits

  certificated A&P mechanic or an appropriately certificated repair station. For modifications of experimental aircraft, refer to the operating limitations issued to that aircraft. Modifications in accordance with FAA Order 8130.2, Airworthiness Certification of Aircraft and Related Products, may require ... notification of the issuing authority. Special Flight Permits A special flight permit is a Special Airworthiness Certificate authorizing operation of an aircraft that does not currently meet applicable airworthiness requirements but is safe for a specific flight. Before the permit…

• Pilot's Handbook of Aeronautical Knowledgep. 10-3
  Chapter 10: Weight and Balance › Balance, Stability, and Center of Gravity › Stability

  those mentioned for an excess weight condition. It is vital to comply with weight and balance limits established for all aircraft. Operating above the maximum weight limitation compromises the structural integrity of the aircraft and can adversely affect performance. Stability ... should not be located for flight. These limits are published for each aircraft in the Type Certificate Data Sheet (TCDS), or aircraft specification and the AFM or pilot’s operating handbook (POH). If the CG is not within the allowable…

• Aeronautical Information Manualp. 4-6-3
  Chapter 4. Air Traffic Control › Section 5. Surveillance Systems › 4-6-4. Flight Planning into RVSM Airspace

  equipment suffix informs ATC: 1. Whether or not the operator and aircraft are authorized to fly in RVSM airspace. 2. The navigation and/or transponder capability of the aircraft (e.g., advanced RNAV, transponder with Mode C). f. Significant ATC uses ... Climb to and Descent from Flight Levels Above RVSM Airspace Without Intermediate Level Off, for policy on limited operation of unapproved aircraft in RVSM airspace…

• Pilot's Handbook of Aeronautical Knowledgep. 1-23
  Chapter 1: Introduction To Flying › Knowledge and Skill Tests › When To Take the Practical Test

  will also be asked to produce and explain the: • Aircraft’s registration certificate • Aircraft’s airworthiness certificate • Aircraft’s operating limitations or FAA-approved aircraft flight manual (if required) • Aircraft equipment list • Required weight and balance data • Maintenance records • Applicable ... certification and aircraft selected. These standards may be downloaded free of charge from the FAA at www.faa.gov. They may also be purchased from the Superintendent of Documents or GPO bookstores. Most airport fixed-base operators and flight schools carry…

• Pilot's Handbook of Aeronautical Knowledgep. 5-32
  Chapter 5: Aerodynamics of Flight › Load Factors

  understanding of the forces that act on the aircraft, the advantageous use of these forces, and the operating limitations of the aircraft being flown…