Instrument Rating – Airplane › V. Navigation Systems › Task B. Departure, En Route, and Arrival Operations

IR.V.B.K2

Knowledge

Pilot/controller responsibilities, communication procedures, and ATC services available to pilots.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aeronautical Information Manual p. 5-2-7
Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-9. Instrument Departure Procedures (DP) - Obstacle Departure Procedures (ODP), Stan…
Instrument Departure Procedures (DP) - Obstacle Departure Procedures (ODP), Standard Instrument Departures (SID), and Diverse Vector Areas (DVA) a. Instrument departure procedures are preplanned instrument flight rule (IFR) procedures which provide obstruction clearance from the terminal area to the appropriate ... route structure. There are two types of DPs, Obstacle Departure Procedures (ODP), printed either textually or graphically, and Standard Instrument Departures (SID), always printed graphically. All DPs, either textual or graphic may be designed using either conventional or RNAV criteria…
Instrument Flying Handbook p. 10-5
Chapter 10: IFR Flight › Departure Procedures (DPs) › Radar-Controlled Departures
Radar-Controlled Departures On IFR departures from airports in congested areas, a pilot normally receives navigational guidance from departure control by radar vector. When a departure is to be vectored immediately following takeoff, the pilot is advised before ... initial heading to be flown. This information is vital in the event of a loss of two-way radio communications during departure. The radar departure is normally simple. Following takeoff, contact departure control on the assigned frequency when advised…
Instrument Procedures Handbook p. 3-1
Chapter 3: Arrivals
there are fewer demands on the pilot’s attention, leaves the pilot free to concentrate on precise control of the aircraft and better equipped to deal with problems that might arise during the last segment of the flight ... This chapter focuses on the current procedures pilots and air traffic control (ATC) use for instrument flight rule (IFR) arrivals in the National Airspace System (NAS). The objective is to provide pilots with an understanding of ATC arrival…
Remote Pilot - Small Unmanned Aircraft Systems Study Guide p. 39
Chapter 7: Radio Communication Procedures › Traffic Advisory Practices at Airports without Operating Control Towers › Airport Operations without Operating Control Tower
Understanding Proper Radio Procedures Understanding proper radio phraseology and procedures contribute to a pilot’s ability to operate safely and efficiently in the airspace system. A review of the Pilot/Controller Glossary contained in the AIM assists a pilot in understanding standard radio terminology. The AIM also contains many examples of radio communications. ICAO has adopted a phonetic alphabet that should be used in radio communications. When communicating with ATC, pilots should use this alphabet to identify…
14 CFR Part 141 — Pilot Schools Open
14 CFR Part 141, Appendix J to Part 141—Aircraft Type Rating Course, For Other Than an Airline Transport Pilot Certificate
Transport Pilot Certificate (1) A type rating for an airplane—single-engine course: (i) Preflight preparation; (ii) Preflight procedures; (iii) Takeoff and departure phase; (iv) In-flight maneuvers; (v) Instrument procedures; (vi) Landings and approaches to landings; (vii) Normal ... abnormal procedures; (viii) Emergency procedures; and (ix) Postflight procedures. (2) A type rating for an airplane—multiengine course: (i) Preflight preparation; (ii) Preflight procedures; (iii) Takeoff and departure phase; (iv) In-flight maneuvers; (v) Instrument procedures; (vi) Landings and approaches…