SH.II.D.K1c
KnowledgePurpose of before takeoff checklist items, including:
Configuring the helicopter-simplified flight controls as recommended by the manufacturer
From the FAA library
- Chapter 9: Basic Flight Maneuvers › Normal Takeoff from a Hover › Technique
Normal Takeoff from a Hover A normal takeoff from a hover is an orderly transition to forward flight and is executed to increase altitude safely and expeditiously. Before initiating a takeoff, the pilot should ensure that the proper checklist ... been completed and the helicopter systems are within normal limits. During the takeoff, fly a profile that avoids the cross-hatched or shaded areas of the height/velocity diagram. Technique Refer to Figure 9-12 (position 1). Bring the helicopter…
- Chapter 6: Flight Controls
addition, in some large and fast aircraft, controls are boosted by hydraulically or electrically actuated systems. In both the fly-by-wire and boosted controls, the feel of the control reaction is fed back to the pilot by simulated means ... Current research at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center involves Intelligent Flight Control Systems (IFCS). The goal of this project is to develop an adaptive neural network-based flight control system. Applied directly to flight…
- Chapter 4: Helicopter Components, Sections, and Systems › Hydraulics
Hydraulics Most helicopters, other than smaller piston-powered helicopters, incorporate the use of hydraulic actuators to overcome high control forces. [Figure 4-25] A typical hydraulic system consists of actuators, also called servos, on each flight control, a pump which ... usually driven by the main rotor transmission and a reservoir to store the hydraulic fluid. Some helicopters have accumulators located on the pressure side of the hydraulic system. This allows for a continuous fluid pressure into the system. A switch…
- Chapter 11: Helicopter Emergencies and Hazards › VFR Flight into Instrument Meteorological Conditions
first, as it is natural to look for help in stressful situations. This may distract the pilot from maintaining control of the helicopter. If the pilot is not instrument rated, instrument current nor proficient, or is flying ... equipped helicopter, remaining in VMC is paramount. Pilots who are not trained or proficient in flight solely by reference to instruments have a tendency to attempt to maintain flight by visual ground reference, which tends to result in flying…
- Chapter 1: Introduction To Flying › Who Administers the FAA Practical Tests? › Role of the Certificated Flight Instructor
decision-making, and good operating practices. A pilot training program depends on the quality of the ground and flight instruction the student pilot receives. The flight instructor must possess a thorough understanding of the learning process, knowledge of the fundamentals ... student pilot. Use of a structured training program and formal course syllabus is crucial for effective and comprehensive flight training. It should be clear to the student in advance of every lesson what the course of training will involve…
- Chapter 6: Flight Controls › Flight Control Systems › Servo Tabs
airflow striking the tab counterbalances some of the air pressure against the primary control surface and enables the pilot to move the control more easily and hold the control surface in position. If the linkage between the balance ... fixed surface is adjustable from the flight deck, the tab acts as a combination trim and balance tab that can be adjusted to a desired deflection. Servo Tabs Servo tabs are very similar in operation and appearance to the trim…