SH.V.D.R7

From the FAA library

• Aeronautical Information Manualp. 10-1-1
  Chapter 10. Helicopter Operations › Section 1. Helicopter IFR Operations › 10-1-1. Helicopter Flight Control Systems

  instrument approach. 3. Vnei (never exceed speed - IFR). 4. Maximum approach angle. 5. Weight and center of gravity limits. 6. Aircraft configuration limitations (such as aircraft door positions and external loads). 7. Aircraft system limitations (generators, inverters, etc.). 8. System…

• Aeronautical Information Manualp. 4-1-10
  Chapter 4. Air Traffic Control › Section 1. Services Available to Pilots › 4-1-13. Automatic Terminal Information Service (ATIS)

  receipt of a broadcast or who acknowledge receipt of a broadcast which is not current. g. To serve frequency limited aircraft, FSSs are equipped to transmit on the omnirange frequency at most en route VORs used as ATIS voice outlets…

• Pilot's Handbook of Aeronautical Knowledgep. 5-37
  Chapter 5: Aerodynamics of Flight › Load Factors › Rough Air

  speed. Regardless of the speed held, there may be gusts that can produce loads that exceed the load limits. Each specific aircraft is designed with a specific G loading that ... imposed on the aircraft without causing structural damage. There are two types of load factors factored into aircraft design: limit load and ultimate load. The limit load is a force applied to an aircraft that causes a bending…

• Helicopter Flying Handbookp. 13-6
  Chapter 13: Effective Aeronautical Decision-Making › Pilot Self-Assessment › The PAVE Checklist

  minutes worth of fuel?” can lead to poor decisions and disastrous outcomes. Some aviators blatantly violate rules and aircraft limitations without thinking through the consequences. “What indications and change in flight characteristics will I see if I fly this helicopter ... extremely harmful curiosity. Even more astounding is their ignoring to the fact that the damage potentially done to the aircraft will probably manifest later in the aircraft’s life, affecting other crews. Spontaneous excursions in aviation can be deadly. Curiosity…

• Pilot's Handbook of Aeronautical Knowledgep. 9-13
  Chapter 10: Weight and Balance

  such as ADs, provide pilots with ready access to pertinent information needed to safely fly a particular aircraft. By understanding the operations, limitations, and performance characteristics of the aircraft, the pilot can make educated flight decisions. By learning what preventive ... essential tools used to reach that goal. Chapter 10: Weight and Balance Compliance with the weight and balance limits of any aircraft is critical to flight safety. Operating above the maximum weight limitation compromises the structural integrity of an aircraft…

• Aeronautical Information Manualp. 4-4-2
  Chapter 4. Air Traffic Control › Section 4. ATC Clearances and Aircraft Separation › 4-4-3. Clearance Items

  request further clearance as soon as possible. In this event, the altitude/flight level of the aircraft at the clearance limit will be protected so that separation will be provided as required. 4. When an aircraft is 3 minutes or less ... clearance beyond the fix as soon as possible and, whenever possible, at least 5 minutes before the aircraft reaches the clearance limit. 6. Pilots should report to ATC the time and altitude/flight level at which the aircraft reaches the clearance…