Airline Transport Pilot and Type Rating for Airplane Category › VI. Instrument Procedures › Task B. Departure Procedures

AA.VI.B.S5

Skill

Establish two-way communications with the proper controlling agency, use proper phraseology, comply, in a timely manner, with all ATC instructions and airspace restrictions, and exhibit adequate knowledge of communication failure procedures.

Practice questions Ask the tutor

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aeronautical Information Manual p. 5-2-15
Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-9. Instrument Departure Procedures (DP) - Obstacle Departure Procedures (ODP), Stan…
will join the Bizee Two SID at Rockr at or above 10,000 and then comply with the published lateral path and any published speed or altitude restrictions while climbing to the SID top altitude. 9. (An aircraft was issued ... Suzan Two departure, “climb via SID” in the IFR departure clearance. After departure ATC vectors the aircraft off of the SID, and then clears the aircraft to rejoin the SID at Dvine waypoint, which has a published crossing restriction…
Aeronautical Information Manual p. 5-2-5
Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-7. Departure Restrictions, Clearance Void Times, Hold for Release, and Release Times
Departure Restrictions, Clearance Void Times, Hold for Release, and Release Times a. ATC may assign departure restrictions, clearance void times, hold for release, and release times, when necessary, to separate departures from other traffic or to restrict or regulate ... departure flow. Departures from an airport without an operating control tower must be issued either a departure release (along with a release time and/or void time if applicable), or a hold for release. 1. Clearance Void Times. A pilot…