Airline Transport Pilot and Type Rating for Airplane Category › VII. Emergency Operations › Task G. Landing from a No Flap or a Nonstandard Flap Approach

AA.VII.G.R2

Risk management

Selection of a runway based on aircraft limitations, available distance, surface conditions, and wind.

Practice questions Ask the tutor

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Airplane Flying Handbook p. 9-2
Chapter 9: Approaches and Landings › Normal Approach and Landing › Base Leg
Base Leg The placement of the base leg is one of the important judgments made by the pilot to set up for a good landing. [Figure 9-3] The pilot accurately judges the height, distance from the approach ... runway, and rate of descent to allow a stabilized approach, round out, and touchdown at the desired spot. The distance depends on the altitude of the base leg, the current winds, and the amount of wing flaps used. When there…
Pilot's Handbook of Aeronautical Knowledge p. 11-16
Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Landing Performance
cases, the pilot must make an accurate prediction of takeoff distance from the performance data of the AFM/POH, regardless of the runway available, and strive for a polished, professional takeoff procedure. In the prediction of takeoff distance from the AFM/POH ... following primary considerations must be given: • Pressure altitude and temperature—to define the effect of density altitude on distance • Gross weight—a large effect on distance • Wind—a large effect due to the wind or wind component along the runway…
Airplane Flying Handbook p. 9-25
Chapter 9: Approaches and Landings › Power-Off Accuracy Approaches › 90° Power-Off Approach
Power-Off Approach The 90° power-off approach is made from a base leg and requires an approximate 90° turn onto the final approach. The approach path may be varied by positioning the base leg closer to or farther ... from the approach end of the runway according to wind conditions. [Figure 9-25] The glide from the key position on the base leg through the 90° turn to the final approach is the final part of all accuracy landing…
Aviation Maintenance Technician Handbook - Airframe p. 13-1
Chapter 13: Aircraft Landing Gear Systems › Landing Gear Types
Chapter 13: Aircraft Landing Gear Systems Landing Gear Types Aircraft landing gear supports the entire weight of an aircraft during landing and ground operations. They are attached to primary structural members of the aircraft. The type of gear depends ... aircraft design and its intended use. Most landing gear have wheels to facilitate operation to and from hard surfaces, such as airport runways. Other gear feature skids for this purpose, such as those found on helicopters, balloon gondolas…