Tutor Platform

AA.VII.G.S2

Skill

Coordinate with crew, if applicable, and complete applicable checklist(s) for the malfunction, approach, and landing.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 9: Approaches and Landings › Power-Off Accuracy Approaches › 180° Power-Off Approach

    Full flaps should be delayed until it is clear that adding them will not cause the landing to be short of the point. The pilot should never try to stretch the glide or retract the flaps to reach the desired ... landing spot. On short final, full attention is given to making a good, safe landing rather than concentrating on the selected landing spot. The approach angle used and final approach airspeed determine the probability of landing on the spot…

  • Chapter 9: Approaches and Landings › Normal Approach and Landing › Final Approach

    drift correction is established and maintained to follow a ground track perpendicular to the extension of the landing runway centerline. This requires that the airplane be angled sufficiently into the wind to prevent drifting farther away from the intended landing ... spot. Figure 9-3. Base leg and final approach. Final Approach After the base-to-final approach turn is completed, the pilot aligns the longitudinal axis of the airplane with the centerline of the runway or landing surface…

  • Chapter 9: Approaches and Landings › Faulty Approaches and Landings › Low Final Approach

    Faulty Approaches and Landings Landing involves many precise, time-sensitive, and sequential control inputs. When corrected early, small errors are often not noticeable. On the other hand, uncorrected errors may place the airplane and occupants in an undesirable state. Since ... pilot training normally includes exposure to landing deviations and their appropriate remedies, this section covers several common landing imperfections. Low Final Approach When the base leg is too low, insufficient power is used, landing flaps are extended prematurely…

  • Chapter 9: Approaches and Landings › Crosswind Approach and Landing

    Common Errors Common errors with forward slips to a landing: 1. Incorrect pitch adjustments that result in poor airspeed control. 2. Reacting to erroneous airspeed indications. 3. Using excess power while trying to lose altitude. 4. A slip ... same direction as any crosswind. 5. Poor glidepath control. 6. Late transition to a sideslip during landing with crosswinds. 7. Landing without the longitudinal axis parallel to runway. 8. Landing off the centerline. Crosswind Approach and Landing Most runways…

  • Chapter 9: Approaches and Landings › Normal Approach and Landing

    Normal Approach and Landing Normal approach and landing procedures are used when the engine power is available, the wind is light or the final approach is made directly into the wind, the final approach path has no obstacles ... landing surface is firm and of ample length to gradually bring the airplane to a stop. The selected landing point is normally beyond the runway approach threshold but within the first 1⁄3 of the runway. The factors involved…

  • Chapter 9: Approaches and Landings › Normal Approach and Landing › Base Leg

    base leg is one of the important judgments made by the pilot to set up for a good landing. [Figure 9-3] The pilot accurately judges the height, distance from the approach end of the runway, and rate of descent ... allow a stabilized approach, round out, and touchdown at the desired spot. The distance depends on the altitude of the base leg, the current winds, and the amount of wing flaps used. When there is a strong wind on final…