AA.VIII.A.S3
SkillCoordinate with crew, if applicable, and complete the appropriate checklist(s) after clearing the runway.
From the FAA library
- Chapter 4. Air Traffic Control › Section 3. Airport Operations › 4-3-21. Exiting the Runway After Landing
Pilots must not exit the landing runway onto another runway unless authorized by ATC. At airports with an operating control tower, pilots should not stop or reverse course on the runway without first obtaining ATC approval. b. Taxi clear ... runway unless otherwise directed by ATC. An aircraft is considered clear of the runway when all parts of the aircraft are past the runway edge and there are no restrictions to its continued movement beyond the runway holding position markings…
- Chapter 1: Introduction to Flight Training › Safety Considerations › Use of Checklists
Checklists Checklists have been the foundation of pilot standardization and flight deck safety for years. [Figure 1-16] The checklist is a memory aid and helps to ensure that critical items necessary for the safe operation of aircraft ... overlooked or forgotten. Checklists need not be “do lists.” In other words, the proper actions can be accomplished, and then the checklist used to quickly ensure all necessary tasks or actions have been completed with emphasis on the “check…
- Chapter 4. Air Traffic Control › Section 3. Airport Operations › 4-3-6. Use of Runways/Declared Distances
planning prior to takeoff or in performance assessments conducted at the time of landing must fall within the applicable declared distances before the pilot can accept that runway for takeoff or landing. (c) Runway design standards may impose restrictions ... amount of runway available for use in takeoff and landing that are not apparent from the reported physical length of the runway or from runway markings and lighting. The runway elements of Runway Safety Area (RSA), Runway Object Free Area…
- Chapter 14: Airport Operations › Collision Avoidance › Runway Incursion Avoidance
preflight planning, before descending to land and while taxiing, as needed. • Know airport signage. • Review NOTAM for information on runway/ taxiway closures and construction areas. • Request progressive taxi instructions from ATC when unsure of the taxi route. • Check for traffic ... before crossing any runway hold line and before entering a taxiway. • Turn on aircraft lights and the rotating beacon or strobe lights while taxing. • When landing, clear the active runway as soon as possible, then wait for taxi instructions before…
- Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Runway Surface and Gradient
Ensure that runways are adequate in length for takeoff acceleration and landing deceleration when less than ideal surface conditions are being reported. Figure 11-15. Takeoff distance chart. The gradient or slope of the runway is the amount of change ... runway height over the length of the runway. The gradient is expressed as a percentage, such as a 3 percent gradient. This means that for every 100 feet of runway length, the runway height changes by 3 feet. A positive…
- CHAPTER 6. PART 107 SUBPART C, REMOTE PILOT CERTIFICATION › 6.4 Application Process › 6.4.1 Remote Pilot Applicants Without Part 61 Certificates
Once the applicant completes the online application in IACRA, the applicant signs the application electronically and submits it to the Airman Registry for processing. No FAA representative will be required to sign the application if the applicant was able ... self-certify. Note: When an applicant seeking a Remote Pilot Certificate uses this online option, the application transmits electronically from the applicant to the Airman Registry. The only electronic signature reflected on the IACRA application will be the applicant…