AI.IV.A.K1
KnowledgePurpose of the maneuver.
From the FAA library
- Chapter 3: Basic Flight Maneuvers › Glides
The purpose of pitch control during the glide is to maintain the…
- Chapter 7: Ground Reference Maneuvers › Elementary Eights
airplane turns first in one direction and then the opposite direction—like a figure eight. Eights maneuvers are designed for the following purposes: ⦁ Further development of the pilot’s skill in maintaining a specific relationship between the airplane ... during both turning and straight-line flight. ⦁ Developing the pilot’s skills to visualize each specific segment of the maneuver and the maneuver as a whole, prior to execution. ⦁ Developing a pilot’s ability to intuitively manipulate flight controls…
- Glossary › Domestic Reduced Vertical Separation Minimum
opening near the leading edge of a wing that ducts air onto the top surface of the wing. Its purpose is to increase lift at higher angles of attack. FL. See flight level. Flameout. A condition in the operation ... Basic maneuvers, flown by reference to the instruments rather than outside visual cues, for the purpose of practicing basic attitude flying. The patterns simulate maneuvers encountered on instrument flights such as holding patterns, procedure turns, and approaches…
- Chapter 5: Maintaining Aircraft Control: Upset Prevention and Recovery Training › Slow Flight
pilot training and testing purposes, slow flight includes two main elements: ⦁ Slowing to, maneuvering at, and recovering from an airspeed at which the airplane is still capable of maintaining controlled flight without activating the stall warning—5 to 10 knots…
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
control column and/or rudder pedals may be limited. The purpose of these design limits is to prevent the pilot from inadvertently overcontrolling and overstressing the aircraft during normal maneuvers…
- Chapter 7, Section II: Airplane Basic Flight Maneuvers › Common Errors › Timed Turns
instrumentation used to perform this maneuver is the turn rate indicator as well as the clock. The purpose of this maneuver is to allow the pilot to gain proficiency in scanning as well as to further develop the pilot…